I thought John's price estimate was a little high, OK for wheel
bearings, but high for little ones. My local tool repair shop was
cheaper then that.
So I did a google and found
this.http://www.vxb.com/page/bearings/PROD/MBB/686zz10 24 $/10
You should be able to buy these locally for 3 or 4 $
A tip on installing sealed bearings. Never stress across the
bearings. If the outer race is pressed in, use a socket that just
touches the outer race. If it presses on a shaft, only tap the inner
race. Putting a part in the freezer to shrink it a bit is a good idea
sometimes. Banging on the wrong race will cause premature failure.
--
feel the light
------------------------------------------------------------------------
feel the light's Profile: http://www.unicyclist.com/profile/14551
View this thread: http://www.unicyclist.com/thread/27501
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com