UK and Europe · Public discussion

Lumotec headlight on Brompton

Started by David Damerell · · Last activity · 9 posts · 897 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
18 April 2007
Last activity
23 April 2007
Original author
David Damerell
Posts
9
Discussion status
Public discussion
Total views
897
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–9 of 9
Posts remain in their original chronological order.

Text size
  1. My Brompton was stolen recently. This is rather irksome - and if you are
    offered a dark green B with a SRAM 3-speed, a Schmidt dynamo hub, a B-17
    Narrow, and a B&M Oval Plus kludged onto the handlebars, let me know - but
    that's not what I'm asking about.

    I'm intending to replace it (thank you, Nationwide's insurance service). I
    see that SJS Cycles sell a Schmidt E6 headlamp which, with a special
    bracket, will fit on the fork crown of a Brompton under the front carrier
    rack. However, I don't go super fast on the Brommie, and a front
    standlight would be more useful; what I am wondering is whether the very
    similarly sized Lumotec Plus (round) headlamp will fit in the same space.

    Is anyone doing this with a round Lumotec Plus? Failing that, does anyone
    have one on any kind of bike they could measure up for me, please?
    --
    David Damerell <[email hidden]> Distortion Field!
    Today is Gloucesterday, April.

  2. David Damerell said:

    I'm intending to replace it (thank you, Nationwide's insurance service). I
    see that SJS Cycles sell a Schmidt E6 headlamp which, with a special
    bracket, will fit on the fork crown of a Brompton under the front carrier
    rack. However, I don't go super fast on the Brommie, and a front
    standlight would be more useful; what I am wondering is whether the very
    similarly sized Lumotec Plus (round) headlamp will fit in the same space.

    Yes.

    Quoted message said:

    Is anyone doing this with a round Lumotec Plus? Failing that, does anyone
    have one on any kind of bike they could measure up for me, please?

    I've actually abandoned my round Lumotec in favour of a non-standlight
    Basta, but it's a long and silly story. There wasn't /quite/ enough
    room for the Lumotec, and this caused various degrees of electrical
    erosion over time and the damn thing wasn't reliable, so I thought that
    Brom's own would be the Way Forwards. On the blower to Biketrax, and
    the next day a Basta duly appears... and is the same size as the B&M and
    doesn't quite bloody fit. Bah! Back on the blower to Biketrax, and
    they are Bemused. Hmmmm, I think my bracket ios the Proper Article, but
    I'm not 101% sure as it came out of the Kinetics Bits Box, so they send
    me a new one, and it is indeed the same as mine. Back on the 'phone,
    even more bemused.
    After a bit of frustrated howling, I decide to see if the brackets are
    really the same or just look that way, and mine actually ran a few
    degrees steeper, and that made all the difference between any of the
    lamps rubbing against the bag frame or not. Back on the 'phone to
    explain what it was, and that I am now a Happy Camper. But ICBA to
    change the Basta (since what caused the problems for the B&M were
    probably not its fault), so I've now got a manual standlight in the form
    of a 1 LED flasher which sits on the bars and I can operate with my thumb.

    Moral: if your bracket is slightly out of spec it will make a few mm
    difference and that's enough to bugger everything up.

    HTH, Pete.
    --
    Peter Clinch Medical Physics IT Officer
    Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
    Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
    net [email hidden] http://www.dundee.ac.uk/~pjclinch/

  3. Quoting Peter Clinch <[email hidden]>:

    Quoted message said:
    David Damerell said:

    rack. However, I don't go super fast on the Brommie, and a front
    standlight would be more useful; what I am wondering is whether the very
    similarly sized Lumotec Plus (round) headlamp will fit in the same space.


    Yes.

    Rah! Your cautionary tale has been snipped, but heeded. Thanks.
    --
    David Damerell <[email hidden]> Distortion Field!
    Today is Gloucesterday, April.

  4. David Damerell said:

    Rah! Your cautionary tale has been snipped, but heeded. Thanks.

    Or, if a non-standlight Basta is okay just order the new Brom with the
    now standard option of the SON XS hub and it'll have one fitted when it
    lands.

    Having had standlights for a while I was a bit nervous of not having
    one, but it's a non-problem as it turns out and there's always the
    manual 1 LED alternative for a few quid which also gives you a removable
    and independent Just Inb Case tocrhlette

    Pete.
    --
    Peter Clinch Medical Physics IT Officer
    Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
    Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
    net [email hidden] http://www.dundee.ac.uk/~pjclinch/

  5. David Damerell wrote:
    what I am wondering is whether the very

    Quoted message said:

    similarly sized Lumotec Plus (round) headlamp will fit in the same space.

    Yes, but you would be better of with a non-plus version. Unless matters
    have improved unexpectedly, the standlight is dark yellow, the switch
    the work of stan and the electronics not very reliable
    --
    ---
    Marten Gerritsen

    INFOapestaartjeM-GINEERINGpuntNL
    www.m-gineering.nl

  6. Quoting Peter Clinch <[email hidden]>:

    Quoted message said:
    David Damerell said:

    Rah! Your cautionary tale has been snipped, but heeded. Thanks.


    Or, if a non-standlight Basta is okay just order the new Brom with the
    now standard option of the SON XS hub and it'll have one fitted when it
    lands.

    Basically the choice I had was to wait weeks for a new B or buy the M3L
    the local bike shop had and get one _right now_, with the other bits and
    bobs coming from SJS or similar. I went for the latter, and that does mean
    I can mix and match.

    Quoted message said:

    Having had standlights for a while I was a bit nervous of not having
    one, but it's a non-problem as it turns out and there's always the
    manual 1 LED alternative for a few quid which also gives you a removable
    and independent Just Inb Case tocrhlette

    I'm going to mount my el-cheapo LED backup somewhere anyway, yes.
    --
    David Damerell <[email hidden]> Distortion Field!
    Today is Gloucesterday, April.

  7. Quoting M-gineering <[email hidden]>:

    Quoted message said:
    David Damerell said:

    what I am wondering is whether the very
    similarly sized Lumotec Plus (round) headlamp will fit in the same space.


    Yes, but you would be better of with a non-plus version. Unless matters
    have improved unexpectedly, the standlight is dark yellow, the switch
    the work of stan and the electronics not very reliable

    Now I read this. I'll report back on the standlight.
    --
    David Damerell <[email hidden]> Distortion Field!
    Today is Gloucesterday, April.

  8. Den 2007-04-18 14:41:09 skrev David Damerell
    <[email hidden]>:

    Quoted message said:

    what I am wondering is whether the very
    similarly sized Lumotec Plus (round) headlamp will fit in the same space.

    Is anyone doing this with a round Lumotec Plus? Failing that, does anyone
    have one on any kind of bike they could measure up for me, please?

    Nope sorry.

    I have an Inoled 20+ headlight on my Brompton and it's very nice. The
    original bracket was too small, so I got a longer one which has the light
    well in front of the luggage block.

    The angle of the bracket is very important, not only for not rubbing on
    the luggage or the luggage block, but also depending on what light you
    want, high or low. It's not rocket science, but also non-trivial to
    getting the most out of your light.

    I wrote a review on BromptonTalk here:
    http://groups.yahoo.com/group/BromptonTalk/message/32928

    Erik Sandblom

    --
    Oil is for sissies

  9. Quoting Erik Sandblom <[email hidden]>:

    Quoted message said:

    I have an Inoled 20+ headlight on my Brompton and it's very nice. The
    original bracket was too small, so I got a longer one which has the light
    well in front of the luggage block.

    I've ordered the Schmidt bracket for adding their E6 to a Brompton, on the
    basis that the E6 seems to be a very similar size and shape. Failing that,
    I've got a whole collection of brackets; failing that, I've got a friend
    with a workshop who knows what she's doing.
    --
    David Damerell <[email hidden]> Distortion Field!
    Today is Stilday, April - a weekend.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.