Cycling Equipment · Public discussion

patching plural proximate punctures

Started by meb · · Last activity · 6 posts · 423 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
26 October 2003
Last activity
27 October 2003
Original author
meb
Posts
6
Discussion status
Public discussion
Total views
423
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. If plural punctures are apart by less than 1/2 inch, is it better to use one patch covering both, or seperate patches?

  2. meb may have said:

    If plural punctures are apart by less than 1/2 inch, is it better to use one patch covering both,
    or seperate patches?

    In my experience, if the available patches are not large enough to cover both punctures and leave an
    adequate margin around them, then swap tubes or count on having to redo the patch job later. At 15mm
    of puncture separation or less, I have found that two patches are likely to leak. the same is true
    for the dreaded New Puncture Just Next To The Patch Over An Old One.

    --
    My email address is antispammed; pull WEEDS if replying via e-mail. Yes, I have a killfile. If I
    don't respond to something, it's also possible that I'm busy.

  3. "meb" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    If plural punctures are apart by less than 1/2 inch, is it better to use one patch covering both,
    or seperate patches?

    Yes.

    Bill "what's with these Cycling Forum posters, anyway?" S.

  4. The perplexing problem of plentiful or plural proximate punctures pertains to patch persintence.

    One big patch is what I do and it works. You can even use an old tube as a patch, but you have to
    get all the shine off it with a grinder or similar. It's tedious to do this and I've only done it to
    be able to in case the need arose

  5. "Sorni" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    "meb" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    If plural punctures are apart by less than 1/2 inch, is it better to use one patch covering
    both, or seperate patches?

    Yes.

    Bill "what's with these Cycling Forum posters, anyway?" S.

    Cyclingforums.com has passthru into Usenet and it looks like you are participating in a website
    forum and not a news reader. Wouldn't JD have a time if MTBR started the same thing?!

    Mike

  6. "Michael Dart" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:


    "Sorni" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    "meb" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    If plural punctures are apart by less than 1/2 inch, is it better to


    use

    Quoted message said:
    Quoted message said:
    Quoted message said:

    one patch covering both, or seperate patches?

    Yes.

    Bill "what's with these Cycling Forum posters, anyway?" S.

    Cyclingforums.com has passthru into Usenet and it looks like you are participating in a website
    forum and not a news reader. Wouldn't JD have


    a

    Quoted message said:

    time if MTBR started the same thing?!

    Who?

    🙂

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.