Cycling Equipment · Public discussion

wheel creaking under load up a monocline

Started by Aussie · · Last activity · 5 posts · 349 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
7 January 2007
Last activity
8 January 2007
Original author
Aussie
Posts
5
Discussion status
Public discussion
Total views
349
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. Hi,

    This is where the new problem starts. My rear wheel starts creaking in
    25 tooth gear under my 92 kg frame and 20 kg lpayload(it is not just my

    lunch in the backpack although I must admit I love my food)

    What could it be? Is it that I have the wrong force applied on the
    cassette on installation? It only happens on the 25 tooth under load up

    a climb. It occurs in and out of saddle. Any ideas??? I need to ride up

    this hill every day to go home to my wife an family. I do not want to
    destroy 3 wheels in 2 months!

    Here is the background that has lead to me wanting help. I had an old
    set of mavic open cd 4 which had rear wheel problems. I had it rebuild
    in the last 6 months after a few seperate incidents of broken spokes on

    the drive side. So I went to local bike shop after last major break
    which cost me $75 just to get it one new spoke and the wheel trued (The

    same bike shop quoted me $80 for a complete rebuild of wheel with new
    spokes and nipples???).

    So I have bite the bullet and bought a new wheelset. I now have a 9
    speed Mavic Aksium rear being used on an old down tube 8 speed shifters

    on friction. I have an old Ultegra 600 rear derauiller. The wheelset,
    13-25 9 speed cassette and chain kit, Michelin tyres and tubes cost me
    only $480 with postage from the UK!

    On installation of new cassette and chain, the new chain caught on the
    old Ultegra front deraullier and snapped "clean off" [al la Clint
    Eastwood]. I now have an old Suntour GPX front deraullier which the
    above bike shop sold to me for $20 after a little adjustment after
    installation [good service guys!!!]. It works great now (no rubbing now

    when on the small ring when in 25 tooth on the rear!!!).

    So now my chain is clean and working, gears are working but now I go on

    my first ride from Penrith to Glenbrook. The Lapstone Monocline is
    unforgiving climb from the Lapstone turnoff to the local primary
    school. This is where the creaking started noticeably (I was in denial
    before then, it has been there all the time I have had the wheelset
    going just hoping it was going to go away)

  2. Try a little grease onto the freehub body and make sure the big spacer
    supplied with those wheels is on first and the cogset is TIGHT!!

    Aussie said:

    Hi,

    This is where the new problem starts. My rear wheel starts creaking in
    25 tooth gear under my 92 kg frame and 20 kg lpayload(it is not just my

    lunch in the backpack although I must admit I love my food)

    What could it be? Is it that I have the wrong force applied on the
    cassette on installation? It only happens on the 25 tooth under load up

    a climb. It occurs in and out of saddle. Any ideas??? I need to ride up

    this hill every day to go home to my wife an family. I do not want to
    destroy 3 wheels in 2 months!

    Here is the background that has lead to me wanting help. I had an old
    set of mavic open cd 4 which had rear wheel problems. I had it rebuild
    in the last 6 months after a few seperate incidents of broken spokes on

    the drive side. So I went to local bike shop after last major break
    which cost me $75 just to get it one new spoke and the wheel trued (The

    same bike shop quoted me $80 for a complete rebuild of wheel with new
    spokes and nipples???).

    So I have bite the bullet and bought a new wheelset. I now have a 9
    speed Mavic Aksium rear being used on an old down tube 8 speed shifters

    on friction. I have an old Ultegra 600 rear derauiller. The wheelset,
    13-25 9 speed cassette and chain kit, Michelin tyres and tubes cost me
    only $480 with postage from the UK!

    On installation of new cassette and chain, the new chain caught on the
    old Ultegra front deraullier and snapped "clean off" [al la Clint
    Eastwood]. I now have an old Suntour GPX front deraullier which the
    above bike shop sold to me for $20 after a little adjustment after
    installation [good service guys!!!]. It works great now (no rubbing now

    when on the small ring when in 25 tooth on the rear!!!).

    So now my chain is clean and working, gears are working but now I go on

    my first ride from Penrith to Glenbrook. The Lapstone Monocline is
    unforgiving climb from the Lapstone turnoff to the local primary
    school. This is where the creaking started noticeably (I was in denial
    before then, it has been there all the time I have had the wheelset
    going just hoping it was going to go away)

  3. In article <[email hidden]>,

    Aussie said:

    Hi,

    This is where the new problem starts. My rear wheel starts creaking in
    25 tooth gear under my 92 kg frame and 20 kg lpayload(it is not just my

    lunch in the backpack although I must admit I love my food)


    [snip]

    Quoted message said:

    my first ride from Penrith to Glenbrook. The Lapstone Monocline is
    unforgiving climb from the Lapstone turnoff to the local primary
    school. This is where the creaking started noticeably (I was in denial
    before then, it has been there all the time I have had the wheelset
    going just hoping it was going to go away)

    Creaks can often seem to be coming from an area but are actually from
    somewhere else. You might try greasing the stem, the handlebar/stem
    interface, and the seat rails.

    --
    Ted Bennett

  4. Ted Bennett said:

    Creaks can often seem to be coming from an area but are actually from
    somewhere else. You might try greasing the stem, the handlebar/stem
    interface, and the seat rails.

    The ends of the seat rails are the most usual culprit for me - they
    usually start up after a ride in the wet, thanks to spray from the back
    wheel. A drop of lube fixes it.

    --
    Home page: http://members.westnet.com.au/mvw

  5. Michael Warner said:
    Ted Bennett said:

    Creaks can often seem to be coming from an area but are actually from
    somewhere else. You might try greasing the stem, the handlebar/stem
    interface, and the seat rails.

    The ends of the seat rails are the most usual culprit for me - they
    usually start up after a ride in the wet, thanks to spray from the back
    wheel. A drop of lube fixes it.

    Yes, unless it's happening while standing I re-lube in this order:

    1. Seat rail ends.
    2. Seat rail to seatpost clamp.
    3. Seatpost.

    I've never had stem/steerer or stem/handlebar creaks.

    Greg

    --
    "All my time I spent in heaven
    Revelries of dance and wine
    Waking to the sound of laughter
    Up I'd rise and kiss the sky" - The Mekons

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.