Helmet mirror design

Oh yes, I forgot to memtsion: Use some small sheet metal screw to attach
the visor to the helmet. Valcro will not cut it with the mirror! Kengee
"Ken Bradley" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

I would like to pass on an idea for a mirror that has works good for me. I
ride a recumbent with the bars under the seat, (USS) so I had to get the
mirror higher.

Bend a coat hanger two right angles and attach a small plastic frame
convex stick on mirror (sold at Grand Auto for you car sun visor) Attach
the other end to your helmet visor, I used wire ties and glue. Cheep and
works great. See my pic. posted
on:http://s84.photobucket.com/albums/k27/kengee_photo/

Seeing that helmets are esigned to protect in the event of accident, I
don't think I'd want what amonuts to a steel dart anywhere on it,
especially on a visor so close to the eye.

I use the ThirdEye Pro mirror, which attaches to the side of the helmet,
is plastic, and not in such a dangerous location.

JMHO

- -
Compliments of:
"Your Friendly Neighborhood Wheelman"

If you want to E-mail me use:
ChrisZCorner "at" webtv "dot" net

My website:
http://geocities.com/czcorner

On Thu, 12 Oct 2006 22:01:45 -0400, [email hidden]

(Chris Y.F.N.W.) said:

Seeing that helmets are esigned to protect in the event of accident,

They are designed to make money for the manufacturers and retailers.

Were they designed to protect, we would be able to detect this in
accident rate statistics.

Thanks Chris, you do bring up a good point which I have considered, the end
of my wire is outside my helmet so if it did come off on impact, it could
not get to my eye. I tried a ThirdEye and found it to be too small. If I
did this again I would attach about 2" higher, way above the visor and even
futher away from my eye.
"Chris Y.F.N.W." <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Seeing that helmets are esigned to protect in the event of accident, I
don't think I'd want what amonuts to a steel dart anywhere on it,
especially on a visor so close to the eye.

I use the ThirdEye Pro mirror, which attaches to the side of the helmet,
is plastic, and not in such a dangerous location.

JMHO

- -
Compliments of:
"Your Friendly Neighborhood Wheelman"

If you want to E-mail me use:
ChrisZCorner "at" webtv "dot" net

My website:
http://geocities.com/czcorner

In article <[email hidden]>,

Ken Bradley said:

I would like to pass on an idea for a mirror that has works good for me. I
ride a recumbent with the bars under the seat, (USS) so I had to get the
mirror higher.

Bend a coat hanger two right angles and attach a small plastic frame convex
stick on mirror (sold at Grand Auto for you car sun visor) Attach the other
end to your helmet visor, I used wire ties and glue. Cheep and works great.
See my pic. posted on:http://s84.photobucket.com/albums/k27/kengee_photo/

I have/use a Mirrcycle handlebar mirror. Despite poplular
denegrating opinions about handlebar mirrors, it works very
well, and within reasonable expectations of a mirror of any
sort on urban-ish routes.

Eric Sande might take me to task for having it, but I use
my eyeballs a lot, too -- in fact, mostly. The mirror is
just supplementary (but still occasionally useful.)

cheers,
Tom

--
-- Nothing is safe from me.
Above address is just a spam midden.
I'm really at: tkeats [curlicue] vcn [point] bc [point] ca

Yea Tom, I used to use a Mirrcycle handlebar mirror ( best one I tried) but
it's much too low on my USS recumbent. Your mirror should be very near your
normal site line . I gave my Mirrcycle to a friend on a OSS (high bars)
bent. But, as you say a look back is best!
----- Original Message -----
From: "Tom Keats" <[email hidden]>
Newsgroups: rec.bicycles.misc
Sent: Friday, October 13, 2006 9:33 PM
Subject: Re: Helmet mirror design

"Tom Keats" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

In article <[email hidden]>,

Ken Bradley said:

I would like to pass on an idea for a mirror that has works good for me.
I
ride a recumbent with the bars under the seat, (USS) so I had to get the
mirror higher.

Bend a coat hanger two right angles and attach a small plastic frame
convex
stick on mirror (sold at Grand Auto for you car sun visor) Attach the
other
end to your helmet visor, I used wire ties and glue. Cheep and works
great.
See my pic. posted on:http://s84.photobucket.com/albums/k27/kengee_photo/

I have/use a Mirrcycle handlebar mirror. Despite poplular
denegrating opinions about handlebar mirrors, it works very
well, and within reasonable expectations of a mirror of any
sort on urban-ish routes.

Eric Sande might take me to task for having it, but I use
my eyeballs a lot, too -- in fact, mostly. The mirror is
just supplementary (but still occasionally useful.)

cheers,
Tom

--
-- Nothing is safe from me.
Above address is just a spam midden.
I'm really at: tkeats [curlicue] vcn [point] bc [point] ca

Group: rec.bicycles.misc Date: Fri, Oct 13, 2006, 5:30pm (EDT-3) From:
[email hidden] (Ken Bradley)

Quoted message said:

Thanks Chris, you do bring up a good
point which I have considered, the end of
my wire is outside my helmet so if it did
come off on impact, it could not get to
my eye.   I tried a ThirdEye and found it
to be too small. If I did this again I would
attach about 2" higher, way above the
visor and even futher away from my eye.

Are you sure you tried the "Pro" model? It can be hard to find as not
all stores stock it. I almost always have to special order this model.
It has a large plate which is adhered to the side of the helmet and a
mirror with a diameter of about two centimeters (about 1 inch), and is
the largest I've seen out of all helmet or eyeglass mounted mirriors.

ThirdEye makes two other models (that I know of) one uses a small velcro
bracket that attaches to the helmet and the other uses a long fingered
thing that grips onto the temple of your eyeglasses. Both of these
models have much smaller mirrors.

- -
Compliments of:
"Your Friendly Neighborhood Wheelman"

If you want to E-mail me use:
ChrisZCorner "at" webtv "dot" net

My website:
http://geocities.com/czcorner

Ken Bradley said:

Bend a coat hanger two right angles and attach a small plastic frame convex
stick on mirror (

don;t need a convex mirror
plain flat is fine
though it should definitely be plastic not glass
for weight and safety reasons
[weight only matters because if it;s lighter, the attachment is easier]

i used piano wire, plastic flat 1" square mirror, and tape to mount

wle