Cycling Equipment · Public discussion

different sizes of crankarms

Started by vuce · · Last activity · 7 posts · 1,316 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
11 September 2006
Last activity
11 September 2006
Original author
vuce
Posts
7
Discussion status
Public discussion
Total views
1,316
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–7 of 7
Posts remain in their original chronological order.

Text size
  1. I was wondering if it is possible to use different crankarms in size on the left and right side (for example 172,5 mm and 175 mm)... I have disproportionate legs due to having one leg 2 cm shorter than the other one, and i think different crankarms might help a bit... Has anyone ever tried anything like this?

  2. If you use the shorter arm on the shorter leg, should be fine...

  3. fauxpas said:

    If you use the shorter arm on the shorter leg, should be fine...


    A better solution might be to get an orthotic shim stuck underneath the cleat of the shorter leg - 2cm is a pretty big gap, and I don't think that a 2.5mm difference in length (5mm diameter) will feel very comfortable to ride.

    The force you'll need to put out with your shorter leg wil be slightly higher as well, which could lead to very unbalanced pedalling.

    HTH,

    n

  4. vuce said:

    I was wondering

    it's a less than perfect soltution, because, while the shorter crank would be easier to reach at the bottom of the stroke, it would be further away at the top of the stroke. In other words, while the 2cm discrepancy might be rectified through the bottom of the pedal stroke, it would be doubled to (approx) a 4cm discrepancy through the top

    ....but, I guess having a lower pedal through the top of the pedal circle.......I'm not sure

  5. Maybe someone needs to invent an electronically or mechanically articulated sliding shortening/lengthening crankarm to compensate through all sectors of the pedal stroke 😄

    Could go all the way to 'suspension crankarms' patent pending

  6. I've used an extra insole in the shoe with the shorter leg.

  7. I seem to recall reading somewhere the ever popular "it depends" in answer to a similar question. Perhaps it was here or at BikeForums.net

    You can run different length cranks, and some do.

    I wouldn't worry about the power issue... it isn't important to exert more with the shorter leg unless your primary concern is that your acceleration is extremely smooth. Some people ride missing one leg, and I suspect they get very little torque from the leg that isn't there... 😉

    But, back to my point. I forget the specifics, but I read somewhere that there is a difference in how to deal with the length issue depending on whether the leg is shorter above or below the knee. The claim was that one condition lends itself to a shim, and the other to a shorter crank.

    Perhaps you should do a search, or seek the guidance of a doctor or other medical professional...

    There is a solution somewhere... You can find a way to be comfortable on your ride! 😄

    Good luck!

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.