rec.sport.unicycling · Public discussion

Quick Release?

Started by DJack · · Last activity · 9 posts · 205 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
rec.sport.unicycling
Published
6 September 2006
Last activity
8 September 2006
Original author
DJack
Posts
9
Discussion status
Public discussion
Total views
205
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–9 of 9
Posts remain in their original chronological order.

Text size
  1. So I have been experimenting with different seat heights for MUNI. Right
    now I do not have a quick release for my seat post. My old torker lx
    had one, and it was nice but I found it did not really hold very well.
    I broke my LX and Right now, my torker DX does NOT have a quick
    release, but the clamp holds my seat well so I rarely need to knock my
    seat around to get it straight after it hits the ground. Do y'all use a
    quick release? Is there a kind that holds strong? I guess once I get
    the right seat height dialed in...maybe I will not have any use for
    one? Thanks for any advice.

    --
    DJack
    ------------------------------------------------------------------------
    DJack's Profile: http://www.unicyclist.com/profile/13285
    View this thread: http://www.unicyclist.com/thread/52959

  2. I don't have a product I can name, but here's some general info. For the
    most part, if you want your seat to stay put, use a dedicated clamp
    with regular bolt. But if you make adjustments enough that you're
    willing to deal with some seat twist (like multiple riders), a
    quick-release can be very handy.

    Unicyle.com offers the following:

    - 'United' (http://www.unicycle.com/shopping/shopexd.asp?id=249) at
    $5.00. This one looks the same as the one I have on my Schwinn Giraffe.
    That one gets the seat raised and lowered in shows, and used to for
    fitting into the car (now I have a minivan). It's cheap, and stronger
    than most quick-relases you find in bike shops.

    - 'Nimbus' (http://www.unicycle.com/shopping/shopexd.asp?id=866) also
    at $5.00. A little confusion here, as the main text says it's 22.2mm
    only, but the detail text says it "fits frames/seatposts in the 25.4mm
    size." It definitely looks nicer.

    - 'Salsa' (http://www.unicycle.com/shopping/shopexd.asp?id=245). At
    $24.00, I'd have high expectations of this one, which is available in
    two sizes. Naturally, measure the outside frame, not the post, to find
    the size.

    The United is the only one that's "unisize," fitting any size
    frame/post. But you may have to use it with a "generic" clamp, and
    those are often the weak point. Having a clamp that covers a wide area
    of post, instead of just a line at the top and bottom of the clamp, is
    much better for your frame, and for seat tightness.

    Most quick-releases I see in bike shops are made to be light. Bike
    seats don't get anywhere near the kind of twisting torque on them that
    we put on unicycle seats, so lightness is more important than tight
    grip, so they're generally expensive and weak.

    With any quick-release (especially if it's holding the front wheel on
    your bike) it's very important to use it properly. The lever is just
    the final part of the tightening process. First you hand-turn it until
    it's most of the way there, then the lever should add the final torque
    to lock it down. If the lever can be flipped or released with one
    finger, it's not going to be tight enough.

    --
    johnfoss

    John Foss
    "jfoss" at "unicycling.com" -- www.unicycling.com
    -----------------------------------------------

    "The worst thing you can do on a unicycle when you land is stop dead."
    -- Kris Holm, world's expert on high-consequence unicycling
    ------------------------------------------------------------------------
    johnfoss's Profile: http://www.unicyclist.com/profile/832
    View this thread: http://www.unicyclist.com/thread/52959

  3. I just updated this 'thread'
    (http://www.unicyclist.com/forums/showthread.php?t=51455) which was
    about a broken KH clamp. I ended up replacing it with a 'HOPE'
    (http://www.hopegb.com/voir_SCGM.html) QR clamp. No twisting so far BUT
    this is on a 29er doing mainly XC.

    --
    norry

    my lastest video [ 'quarry muni'
    (http://www.unicyclist.com/forums/showthread.php?t=51406) ]
    ------------------------------------------------------------------------
    norry's Profile: http://www.unicyclist.com/profile/6901
    View this thread: http://www.unicyclist.com/thread/52959

  4. i donno for Muni.. but i HATE quick release...

    --
    irvinegr

    Check out my SWEET movies!!! http://tinyurl.com/cr7fu
    ------------------------------------------------------------------------
    irvinegr's Profile: http://www.unicyclist.com/profile/10958
    View this thread: http://www.unicyclist.com/thread/52959

  5. irvinegr said:

    i donno for Muni.. but i HATE quick release...

    If you are going to say you hate something at least say why you hate
    it.

    I have a quick release and have had two different kinds so far and I
    find they are a mixed blessing. On one hand I can change my seat hight
    whenever I please which is amazing, I love it as I change seat height
    alot (mostly for other people then I just leave it to whatever they
    wanted cause I'm lazy like that). But on the other I have hurt myself
    pretty badly with it. On my old set up I had a loose quick release that
    flopped around while I was riding, it held tight but it had a lever
    that liked to stab my achilese tendon and losing all sensation in my
    foot isn't fun. I replaced that with the united style clamp and I
    really like the fact that I can tuck it away for falling unis and stuff
    but I still find it to be way to bulky when I try and do stand up and a
    few other things. I think a quick release would be a great thing if it
    were on a long neck, or if they could somehow make it very form
    fitting.

    --
    ntappin

    'how to build a strong comfy saddle from junk.'
    (http://tinyurl.com/hxcb3)
    ------------------------------------------------------------------------
    ntappin's Profile: http://www.unicyclist.com/profile/10800
    View this thread: http://www.unicyclist.com/thread/52959

  6. I ride a salsa QR clamp and it is awesome. It holds the seat really well
    and it doesn't stick out too much. I have had other quick release
    clamps and I have had to turn them around and sideways so they wouldn't
    eat my leg as much. The salsa is good though.

    --
    Spencer Hochberg

    (disclaimer: i may not know what i am talking about)

    maxisback said:

    yeh i kill ppl for a living

    'Gallery.unicyclist.com/spencer'
    (http://Gallery.unicyclist.com/spencer)
    AIM: Litldude2
    Email: Litldude2 (att) aol (dott) com
    'Bedford Unicycles' (http://BedfordUnicycles.ca)
    ------------------------------------------------------------------------
    Spencer Hochberg's Profile: http://www.unicyclist.com/profile/12659
    View this thread: http://www.unicyclist.com/thread/52959

  7. Thanks, I may try to get my hands on one of those salsa QR.

    --
    DJack
    ------------------------------------------------------------------------
    DJack's Profile: http://www.unicyclist.com/profile/13285
    View this thread: http://www.unicyclist.com/thread/52959

  8. salsa makes good stuff but it's pricey. on both my muni and trials i run
    a primo viking double bolt clamp. the only uni related QR first hand
    experience i have is some older torker stuff which totally sucked.

    --
    markf

    stuck in iowa and gainfully employed.
    ------------------------------------------------------------------------
    markf's Profile: http://www.unicyclist.com/profile/8102
    View this thread: http://www.unicyclist.com/thread/52959

  9. Another vote for the Salsa. Works well for rugged Muni. Put a little
    anti-seize on the contact areas of the latch to keep it from wearing
    out quickly.

    --
    entropy

    Shut up and ride.
    ------------------------------------------------------------------------
    entropy's Profile: http://www.unicyclist.com/profile/5816
    View this thread: http://www.unicyclist.com/thread/52959

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.