Cycling Equipment · Public discussion

Polar S725, lap button is "frozen"

Started by Chris M · · Last activity · 5 posts · 494 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
17 August 2006
Last activity
18 August 2006
Original author
Chris M
Posts
5
Discussion status
Public discussion
Total views
494
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. Polar S725, lap button is "frozen" and hard to activate. It also
    gets stuck as if held down. This prevent most functions until the
    button moves enough. I have had to pry it lightly with a fingernail or
    a sharp object (gently).

    I want to know if the watch has a seal covering the button on the
    inside? I would like to try to fix it myself if possible. I have had
    these and other Polar watches opened in the past but it has been
    several years since I have been inside one and I never had any problems
    with the lap button.

    Any ideas? Has anyone opened up an S710, S720 or S725?

  2. Chris M said:

    Polar S725, lap button is "frozen" and hard to activate. It also
    gets stuck as if held down. This prevent most functions until the
    button moves enough. I have had to pry it lightly with a fingernail or
    a sharp object (gently).

    I want to know if the watch has a seal covering the button on the
    inside? I would like to try to fix it myself if possible. I have had
    these and other Polar watches opened in the past but it has been
    several years since I have been inside one and I never had any problems
    with the lap button.

    Any ideas? Has anyone opened up an S710, S720 or S725?

    I had to open my s720i to replace the battery a few months ago. from
    what I recall there is a rubber seal around all the button pins going
    into the body of the hrm. you most likely have a build up around your
    lap button and the only way you can fix it is by opening it, taking out
    the button and wiping the build up off with something. I would recomend
    you do the job yourself as a friend took his into a watch repair to
    change the battery and when he got it back the seal was damaged and it
    died shortly thereafter- the shop owner admitted no responsibility for
    the now worthless watch.

  3. In article <[email hidden]>,

    Quoted message said:


    Chris M said:

    Polar S725, lap button is "frozen" and hard to activate. It also
    gets stuck as if held down. This prevent most functions until the
    button moves enough. I have had to pry it lightly with a fingernail or
    a sharp object (gently).

    I want to know if the watch has a seal covering the button on the
    inside? I would like to try to fix it myself if possible. I have had
    these and other Polar watches opened in the past but it has been
    several years since I have been inside one and I never had any problems
    with the lap button.

    Any ideas? Has anyone opened up an S710, S720 or S725?

    I had to open my s720i to replace the battery a few months ago. from
    what I recall there is a rubber seal around all the button pins going
    into the body of the hrm. you most likely have a build up around your
    lap button and the only way you can fix it is by opening it, taking out
    the button and wiping the build up off with something. I would recomend
    you do the job yourself as a friend took his into a watch repair to
    change the battery and when he got it back the seal was damaged and it
    died shortly thereafter- the shop owner admitted no responsibility for
    the now worthless watch.

    Polar is very fast at service, they normally send it back out almost
    the same day they receive for standard repairs and battery replacements.

    They are also getting a few authorized repair agents, you might be
    lucky and have one local.

    It sounds like you have a small amount of dirt in between the lap button and
    the case. That happened to me. I fixed it by gently washing with a soft
    brush and running water in the grove while working the button slightly.

  4. Chris M said:

    Polar S725, lap button is "frozen" and hard to activate. It also
    gets stuck as if held down. This prevent most functions until the
    button moves enough. I have had to pry it lightly with a fingernail or
    a sharp object (gently).

    I want to know if the watch has a seal covering the button on the
    inside? I would like to try to fix it myself if possible. I have had
    these and other Polar watches opened in the past but it has been
    several years since I have been inside one and I never had any problems
    with the lap button.

    Any ideas? Has anyone opened up an S710, S720 or S725?

    IMO the big red button is a pain in the a**s. Everybody I have spoken with
    complains about it. When my 710 was new, it worked very well, but the more
    I used it the more problems I got with it. It was very difficult to stop an
    exercise and go into the recovery mode (the monitor just added a lap and
    continued).

    When I had to change batteries I asked Polar service to fix this. I got it
    back and it worked ok for a few weeks...

    I call this bad design, since my much older Accurex still got a perfectly
    working button.

    --
    Jørn Dahl-Stamnes
    http://www.dahl-stamnes.net/dahls/

  5. Chris M said:

    Polar S725, lap button is "frozen" and hard to activate. It also
    gets stuck as if held down. > I want to know if the watch has a seal covering the button on the
    inside? I would like to try to fix it myself if possible. I have had
    these and other >
    Any ideas? Has anyone opened up an S710, S720 or S725?

    The red button on Polar 710s and similarf HRMs is a very poor design.
    The slightest bit of dirt gets in there and jams the button, especially
    when riding in the rain on unsealed/gravel roads.

    Now that you have the watch, you needn't despair. Prevention is better
    than cure. When going out on a dirty ride, cover the watch in cling
    film from your kitchen. It isn't nice to read the watch through that,
    especially in the wet, but at least it stops the jamming.

    Once it is jammed, it's time to take out your set of jeweller
    screwdrivers. Open it up and take it apart. It isn't difficult and
    everything inside is self-evident. There are no parts that go shooting
    into your carpet pile. Nevertheless, work in good light on a nice clean
    surface. Once the guts are out, push the button back from the inside.
    You'll see a little pin at the back end of the button - that's the one
    to push back. Now see if it moves freely - work over a sheet of white
    paper so you can see if something falls out.

    Replace everything carefully and make sure the seal is seated properly.
    It can only go in one way. Torque the four screws evenly and go ride.

    It is a bad design, but live with it. The watch' other features make up
    for it.

    Johan Bornman

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.