Hbunnet said:I have recently bought one for my new bike and old saddlebag.
The fitting secures to the saddle rails with a clamp above and below and
is secured by one allen bolt. So you need a minimum distance of saddle
rail clear behind your seatpost. Mine is a conventional setup and I had
no problems.
The rack, now fitted, gives two rods for the saddle bag straps. These
are similar, but rounder than the B17 saddle bag fittings. The clever
thing is that these rods can be retracted against a wee string and the
bag lifted off. This is a breakthrough because it was previously a
serious faff to remove the bag.
I replaced my well worn straps with new ones and fitted them with the
buckle inside.
The carrier works very well and the QR is great, it has transformed how
I use my saddle bag.
I've used one for a good while and find it very good.
As has been said previously I should go for the QR version as the bag is
on or off in seconds.
Only two *problems* ( if you can call them that ).
One is that the saddlebag *sags* down over the ends of the support ( if
you see what I mean) .I have a Carradice Super C and the end pockets are
always full of tools/puncture outfit etc so perhaps that doesn't help.
The second is that if you are not using the saddlebag for whatever
reason the Bagman sticks out over the rack making it difficult to carry
something on the rack.
Despite the above I wouldn't be without it.
Sam Salt