whatis the best way to remove stickers without leaving the sticky stuff on the frame. if there is no way to do it without leaving the sticky stuff on is there a way to get the sticky stuff off. sorry if it was confusing to read because it was sort of hard for me to read and I wrote it but i didn't know of any other way to put it
you should be able to find some goo-gone ... thats supposed to work well
-- skrobo
*><> Unicycle For Christ <>< PM me if you would like to join!!!* ok i have been riding for 3 years, doing tricks for 6 months and being sorta hardcore for 3 months (before that the only trick i did was a hop-180 to backwards riding or a spin off of a wall or something
you should be able to find some goo-gone ... thats supposed to work well
I used it to get the stickers off my Koxx trials frame (which i now regret) and it didn't take off the paint, but it worked great on the glue stuff on the stickers.
Ed
-- edsbelly
Stayin' Single and Keepin' it Wheel (but not 2 wheel) 😎
Quoted message said:
"If unicycling were easy, it'd be called "your mother!" - evil nick
Quoted message said:
"It really would have sucked if your uni got hit by a car. you would then be down to what, a quarter of a bike?" - Max_Pfeifer
That would suck soo much if it still didn't come off. I think I would be fine with the sticker one there but I would definately not want a [censored] soaked one on there:o
-- litldude2
(disclaimer: i may not know what i am talking about) Gallery.unicyclist.com/spencer AIM: Litldude2 Email: Litldude2 (att) aol (dott) com 'Bedford Unicycles' (BedfordUnicycles.ca) ------------------------------------------------------------------------ litldude2's Profile: http://www.unicyclist.com/profile/6134 View this thread: http://www.unicyclist.com/thread/50781
either "goo-gone" or "goof off" can be found at your local hardware store. it does wonders for removing gums, tars, greases, anything you can't get off with soap and water. rubbing alcohol will work as well but it isn't as effective as the two above-mentioned products...
[censored] has that acid in it.. sry I nly kno the french word.. its ure in french neways and that melts away the glue.. just once u [censored] on it whipe it down with a towel and wash it good gooood gooooood
Isoproponol around 70% will work. It is sold as rubbing alchol, but it is good because it wil evaporate off of your frame. It smells really bad and make sure you use gloves. Do not drink. It won't make you blind (thats methanol) but it will probably screw you up.
Acetone works too. Sometimes sold as paint stripper or thinner. Probably won't damage powdercoating, but spot test first! Use gloves!!!
Oh yeah, some spirits will do it too, but why waste them?