thayr said:So it's getting down to the wire... about to make that purchase for a
bigger ride. The largest wheel I've ridden on is 26". Should I go up to
a 29, or go for a 36? I've heard sitting on a 36 puts you way up in the
air but I ride a 6ft so I don't think that would be a problem. I do
mostly street riding, point A to point B. On my 26 I use 125 cranks,
sometimes when I have to quickly slow down I can feel a bit of a
strain, so I can imagine that would be greatly increased on a 29, and
with a 36 even more so (would I need a brake?). So, can anyone give
some riding experience on a 29" with 125 cranks vs. a 36" with 125
cranks (or any other size cranks)?
I have only unied for <2 yrs, but this (my second) year, my stable of
unis filled out: Original:TorkerLX24, then KHXC29, then a TorkerDX20
and a Radial 360.
I ride the LX24, never...permanent loaner;
Next, I ride the 20DX fairly often to practice trialsy stuff.
Next, the KH29 is my only Muni, and I love [censored] Muni, so I ride it
alot, and it's also (with a road-slick tire) my climbing wheel.
Last, and MOST OF ALL! I ride the 36" when I have to get somewhere
quick, but not car-quick or bike-quick.
-However -the real treat for me is aking the 36" for a good exercize
ride - the bliss of riding a big wheel through miles of empty farm
roads is a release of the sweetest proportions.
All that being said, get the 36" 😄.
Brake? You don't need no stinking brake! If you have to stop fast,
jump off. I walk my 36" through crowds, but I'd probably walk my 20",
too, because non-uniers have no idea if you none, some, or complete
control.
--
steveyo
steveyo
...like having your own personal rollercoaster...
------------------------------------------------------------------------
steveyo's Profile: http://www.unicyclist.com/profile/7228
View this thread: http://www.unicyclist.com/thread/49770