Turner tandem

What planet is that guy from anyway? I bet the seats don't move either.

[email hidden] (Shwackman) wrote in message
news:<[email hidden]>...

Quoted message said:

What planet is that guy from anyway? I bet the seats don't move either.

Owning a Turner SWB with the same type of seat, I beg to differ. I can clearly see the rear
bracket is similar to mine, and the elasomer "plugs", w/ support beam, which are attached to the
bottom of the seat by screws, are still there at the base. Turner seats have two pairs of holes
for bottom adjustment and the back support has two slots to adjust over approximately a
four-five inch range (I'm not where my bike is at the moment, so can't be more precise). There
are also three holes in the back support posts to add additional recline options, though not all
are available depending on how far back you've moved the seat (I am short, so this may be a
problem only for my framesize).

I don't own this (or any other) tandem, so I cannot give a knowledgable review. I have enjoyed
my SWB very much, however, and would try his tandem before dissing it, if the opportunity
offered itself. If I could find a) a second rider and b) if I could afford a tandem to begin
with. 🙂 Enjoy your rides.

Regards,

escapevelocity 1999 Turner SWB 1999 Wishbone Classic #31

I agree, how can you "knock" a bike, with out any experience or knowledge of it's ability? I rode a
Turner SWB USS all last summer, it like ALL recumbents had some compromises, but it handled great,
was very quick and the BEST hardshell seat i've used.

escapevelocity said:

[email hidden] (Shwackman) wrote in message
news:<[email hidden]>...

Quoted message said:

What planet is that guy from anyway? I bet the seats don't move either.

Owning a Turner SWB with the same type of seat, I beg to differ. I can clearly see the rear
bracket is similar to mine, and the elasomer "plugs", w/ support beam, which are attached to
the bottom of the seat by screws, are still there at the base. Turner seats have two pairs of
holes for bottom adjustment and the back support has two slots to adjust over approximately a
four-five inch range (I'm not where my bike is at the moment, so can't be more precise). There
are also three holes in the back support posts to add additional recline options, though not
all are available depending on how far back you've moved the seat (I am short, so this may be
a problem only for my framesize).

I don't own this (or any other) tandem, so I cannot give a knowledgable review. I have enjoyed
my SWB very much, however, and would try his tandem before dissing it, if the opportunity
offered itself. If I could find a) a second rider and b) if I could afford a tandem to begin
with. 🙂 Enjoy your rides.

Regards,

escapevelocity 1999 Turner SWB 1999 Wishbone Classic #31

"BentJay" skrev...

Quoted message said:

Here's a new-to-me strange tandem from Turner. Dual in-line steering wheels... whoa!

It certainly looks intriguing. Wouldn't it need some sort of Ackerman steering? I also wonder how it
handles. Could someone closer to him sneak by and bum a testride?

Mikael

Mikael Seierup said:

"BentJay" skrev...

Quoted message said:

Here's a new-to-me strange tandem from Turner. Dual in-line steering wheels... whoa!

It certainly looks intriguing. Wouldn't it need some sort of Ackerman steering? I also wonder how
it handles. Could someone closer to him sneak by and bum a testride?

Ackerman compensates for the difference in steering angle between left
vs. right wheels. It's even simpler to compensate for middle vs. front wheels - just use a shorter
arm in front for the linkage rod, so that the front wheel turns more than the middle wheel.
4-axle trucks do this.

However I still don't understand the reason for this configuration. Did they decide the frame isn't
rigid enough to support two riders between two wheels? If so, the frame would be flexing all the
time to follow road irregularities. Maybe that's OK, but I'd think that strengthening the frame
would require less weight than an additional wheel.

Ken Kobayashi [email hidden] solarwww.mtk.nao.ac.jppersonalOpen ↗

In article <[email hidden]>, [email hidden] says...

Quoted message said:

Mikael Seierup said:

"BentJay" skrev...

Quoted message said:

Here's a new-to-me strange tandem from Turner. Dual in-line steering wheels... whoa!

It certainly looks intriguing. Wouldn't it need some sort of Ackerman steering? I also wonder how
it handles. Could someone closer to him sneak by and bum a testride?

Ackerman compensates for the difference in steering angle between left
vs. right wheels. It's even simpler to compensate for middle vs. front wheels - just use a shorter
arm in front for the linkage rod, so that the front wheel turns more than the middle wheel.
4-axle trucks do this.

However I still don't understand the reason for this configuration. Did they decide the frame
isn't rigid enough to support two riders between two wheels? If so, the frame would be flexing all
the time to follow road irregularities. Maybe that's OK, but I'd think that strengthening the
frame would require less weight than an additional wheel.

Ken Kobayashi [email hidden] solarwww.mtk.nao.ac.jppersonalOpen ↗

According to their website, safety was their concern. They feel that the dual front wheels provide
better cornering and a margin of safety in the event of a front tire blowout.

members.tripod.comindex.HTMLOpen ↗

--
___________________
John Rooker KC2KQT Rochester, NY

Quoted post said:

Originally posted by Bentjay
Here's a new-to-me strange tandem from Turner. Dual in-line steering wheels... whoa!
BentJay

I asked Milt about the 3-wheel design, here's what he said...
"Why I am glad you asked, the reason for the three inline wheels are,
The two front wheels steer so you have direction traction and the wheels span any hole of less than twenty three inches in diameter,
You have an extra wheel if one tire flats, if a two wheel tandem has a flat there is only one wheel/tire to stop with and one can not stop such a bike at speed with only one brake,
my machine has four brakes one is a roller drag operated by the stoker,
it is not necessary to have heavy-duty hubs because the weight is spread over three wheels
then with the length of a bent tandem the stance of the front wheels keeps the frame from rear wobble."

Downside is the extra drag, weight and complications of the mid-wheel.

For another strange tandem, check out the zox duo tandems http://www.zoxbikes.com. They have separately driven wheels.

As a rider of the Barcroft Columbia, there are times my wife would appreciate independent steering.
Perhaps Turner is on to something.

Pete Huber Pulaski, VA

"John Rooker" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

In article <[email hidden]>, [email hidden] says...

Quoted message said:

Mikael Seierup said:

"BentJay" skrev...
> Here's a new-to-me strange tandem from Turner. Dual in-line steering wheels... whoa!

It certainly looks intriguing. Wouldn't it need some sort of Ackerman

steering?

Quoted message said:

Quoted message said:

Quoted message said:

I also wonder how it handles. Could someone closer to him sneak by and

bum a testride?

Quoted message said:

Quoted message said:

Ackerman compensates for the difference in steering angle between left
vs. right wheels. It's even simpler to compensate for middle vs. front wheels - just use a
shorter arm in front for the linkage rod, so that the front wheel turns more than the middle
wheel. 4-axle trucks do this.

However I still don't understand the reason for this configuration. Did they decide the frame
isn't rigid enough to support two riders between two wheels? If so, the frame would be flexing
all the time to follow road irregularities. Maybe that's OK, but I'd think that strengthening
the frame would require less weight than an additional wheel.

Ken Kobayashi [email hidden] solarwww.mtk.nao.ac.jppersonalOpen ↗

According to their website, safety was their concern. They feel that the dual front wheels provide
better cornering and a margin of safety in the event of a front tire blowout.

members.tripod.comindex.HTMLOpen ↗

--
___________________
John Rooker KC2KQT Rochester, NY