Cycling Equipment · Public discussion

Alex Rims G3000 for 29er or loaded touring?

Started by daveornee · · Last activity · 2 posts · 2,602 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
5 May 2006
Last activity
5 May 2006
Original author
daveornee
Posts
2
Discussion status
Public discussion
Total views
2,602
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–2 of 2
Posts remain in their original chronological order.

Text size
  1. Has anyone here used the Alex Rims G3000 [HTML]alexrims.comct g3000.htm[/HTML] for 29er or loaded touring?
    If so, please share your experiences.
    Chalo, if you read this, please share your thoughts even if you haven't used this specific Alex Rims model.
    I plan to build some very strong wheels for riders over 250 pounds that will put them to heavy duty use.

  2. daveornee said:


    Has anyone here used the Alex Rims G3000
    http://alexrims.com/rims/ct_g3000.htm
    for 29er or loaded touring?


    ....

    Quoted message said:

    I plan to build some very strong wheels for riders over 250 pounds
    that will put them to heavy duty use.

    Those are wider, taller, and >100g heavier than most of the 700c rims I
    use with good results (but I do use 48 spoke wheels). If they had been
    available to me, I would have tried them on my electric-assist bike,
    which has 36 spoke hubs. Instead, I settled on these, which
    unfortunately are almost as wide as the maximum tire tize I can
    accomodate in my frame:
    http://www.unicycle.com/shopping/shopexd.asp?id=805 This has limited
    my choice of tires to a very narrow range of sizes that are both wide
    enough to fit on the rim and narrow enough to fit in the frame.

    Alex Rims use 6061-T6 aluminum, rather than the weaker 6106 alloy used
    by Velocity and Mavic for most of their offerings. The use of 6061
    alloy results in slightly lower finish quality, but in my judgment Alex
    rims look fine and the increased strength the alloy offers is much more
    important.

    I suggest pairing rims like those with a frame that can accomodate wide
    tires-- the wider the better. On my electric-assist bike, I now have
    wheels that are strong enough for the application, but the reliability
    of the tires is poor. If I inflate them to their recommended maximum,
    I can't get to work over the broken pavement without getting a pinch
    flat. When I overinflate, then I sometimes suffer blowouts that damage
    the tire bead beyond repair. If I were able to mount tires like
    Schwalbe's Marathon Plus 700x45 or Big Apple 700x50, I doubt I'd have
    to overinflate them to prevent bottoming, even with the rear-biased
    gross weight of roughly 500 pounds that my electric bike must contend
    with.

    The narrowest tires I use are Panaracer Pasela 700x35, which measure
    about 32mm inflated. These are a good choice for "narrow" tires for
    the rims you are considering; they are wide enough to have a more or
    less normal inflated shape on a rim of 19mm inside width.

    Chalo Colina

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.