unicycle dave said:i want a cycle computer to put on my coker. where can i find one & how
do i install it
Most of the bike computers will work, just check that the factor can be
set to 2770 or so (depending on your weight & air pressure, mine is set
for 2768) and it should be ok. Many of them default to around 2150,
and remember, just because it doesn't _list_ 2770 in the instructions
doesn't mean it can't do it. If you can't find one that will go to
2770 (very rare), get a second magnet and set it for 1385 (half of
2770). Ask at your LBS if you can try setting one for 2770 - don't ask
if it -*can*- be done, ask if you can *try *it, they've never set one
for that and won't know.:eek:
Many wireless ones will have a problem if you try to have the readout
in your wrist/hand/pocket.🙁
If you don't have a handle, you may have to mount it on the setpost,
other than that it's not really different than mounting on a bike.
Make sure you route the wires so they will not be loose or they'll get
snagged on something, wrap the excess on the seatpost - if you wrap it
around the fork it may be to close to the tire or your leg.
Suggestion: if you're still UPDing a bit, it may pop off and get lost
(of course that -never- happened to me 🙄 😉 ), therefore get
one cheap, like from Walmart.
--
brian.slater
Brian C. Slater
AKA: Snoopy
Ok, I am now officially in my normal state of -advanced- confusion.
Don't try to confuse me, it won't make any difference. If you try not
to confuse me, that will confuse me.
"To not decide is to decide" - undecided
------------------------------------------------------------------------
brian.slater's Profile: http://www.unicyclist.com/profile/3902
View this thread: http://www.unicyclist.com/thread/49074