Need V-Brake Studs

capvent said:

Anyone know where I can buy them? Tried Answer Products who make the fork but they do not sell. Anyone have any other ideas? Would appreciate it. This is keeping me from enjoying the weather.

The good news is that screw-in canty studs are available. QBP stocks them so most any LBS can get them for you. They aren't even very expensive.

The bad news is that they aren't a standard size. There are about 5 different ones so you have to know what you need before you can order them. The first cut is 6, 8, or 10mm diameter where they screw into the fork.

Thanks Retro. So what should I ask for when I go to my local bike shop? Thanks for the help----really appreciated.

Also, what is QBP? Thanks.

I have seen a glue on one for CF rear stays, I will make a phone call tomorrow to find out where they came from.

QBP=Quality Bicycle Parts, a large wholsale import co in the USA.

capvent said:

Thanks Retro. So what should I ask for when I go to my local bike shop? Thanks for the help----really appreciated.

Ask for screw in canty studs. It will probably help if you bring in your fork so they can see where they go. When I owned my own shop I kept a couple of different sizes in stock so a service oriented shop may even have what you need on hand.

Thanks guys. Going to the shop today. I will let you know what happens. Thanks for the much needed help😄

Trip to the local bike store was a no-go. They only have the studs that do not have the hole for the v-brake. Does anyone know where I can purchase/find a v-brake stud? Any help would be appreciated.