Cycling Equipment · Public discussion

Shredded bar tape

Started by Mark H. · · Last activity · 6 posts · 467 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
14 April 2006
Last activity
21 April 2006
Original author
Mark H.
Posts
6
Discussion status
Public discussion
Total views
467
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. Just a simple question:

    My cork/gel bar tape has been getting a bit nicked/shredded here and there.
    Not ready to change it entirely, what's a good compound to use to seal up
    the damaged sections so it doesn't pull loose/tear off? Something like a
    dab of silicone gel? Crazy glue?

    T.I.A.

  2. Mark H. said:

    Just a simple question:

    My cork/gel bar tape has been getting a bit nicked/shredded here and there.
    Not ready to change it entirely, what's a good compound to use to seal up
    the damaged sections so it doesn't pull loose/tear off? Something like a
    dab of silicone gel? Crazy glue?

    Use new tape.

    It makes the bike look better, ride smoother, and attracts members of
    the opposite sex.

    For the few bucks it costs to replace bar tape, it doesn't make too
    much sense to try to extend the life of some beat up old tape, IMHO.
    But if I were going to try to touch up a bad spot, I suppose I'd
    probably use rubber cement.

    Mark Hickey
    Habanero Cycles
    http://www.habcycles.com
    Home of the $795 ti frame

  3. Mark H. said:

    Just a simple question:

    My cork/gel bar tape has been getting a bit nicked/shredded here and there.
    Not ready to change it entirely, what's a good compound to use to seal up
    the damaged sections so it doesn't pull loose/tear off? Something like a
    dab of silicone gel? Crazy glue?

    Probably anything. But why?

    Just wrap new tape in a new color and get fashion forward.

    Ron

  4. On Fri, 14 Apr 2006 05:01:11 GMT, "Mark H." <[email hidden]>

    Quoted message said:

    Just a simple question:

    My cork/gel bar tape has been getting a bit nicked/shredded here and there.
    Not ready to change it entirely, what's a good compound to use to seal up
    the damaged sections so it doesn't pull loose/tear off? Something like a
    dab of silicone gel? Crazy glue?

    I use a really good grade of electrical tape. I've seen silicone
    sealer used; it can work, but it's usually ugly.
    --
    Typoes are a feature, not a bug.
    Some gardening required to reply via email.
    Words processed in a facility that contains nuts.

  5. Thanks, all. After just wrapping new tape, looking real pretty, tight and
    cushy, I road-rashed one side a bit, so I wanted a quick touch-up to hold up
    for a few rides before re-wrapping. Done. So now for the new.

    How's that leather bar tape perform? I see that Brooks has some out. A
    good idea?

  6. Mark H. said:

    How's that leather bar tape perform? I see that Brooks has some out. A
    good idea?

    I'd like to try that myself, but I'm not going to spend $60 for
    handlebar tape.
    I like the Cinelli Gel tape, which has just the right amount of
    cushioning and grip, and is stretchy and non-adhesive so it is really
    easy to wrap perfectly.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.