From Garmin's Website:
------
GPS satellites circle the earth twice a day in a very precise orbit and transmit signal information
to earth. GPS receivers take this information and use triangulation to calculate the user's exact
location. Essentially, the GPS receiver compares the time a signal was transmitted by a satellite
with the time it was received. The time difference tells the GPS receiver how far away the satellite
is. Now, with distance measurements from a few more satellites, the receiver can determine the
user's position and display it on the unit's electronic map.
A GPS receiver must be locked on to the signal of at least three satellites to calculate a 2D
position (latitude and longitude) and track movement. With four or more satellites in view, the
receiver can determine the user's 3D position (latitude, longitude and altitude). Once the user's
position has been determined, the GPS unit can calculate other information, such as speed, bearing,
track, trip distance, distance to destination, sunrise and sunset time and more.
------
Also note that most GPS units require an initial altitude settings so that it can approximate
distance given changes from that initial altitude setting ( in the absence of 4 or more
satellites ).
Garmin has an excellent "GPS Buide for Beginners" at garmin.comgps4beg.pdfOpen ↗
Bill
"dave b" <[email hidden]> wrote in message
"]news:[email hidden]...
Quoted message said:Seems to me that those gps units can't be very accurate, unless you run in
a
Quoted message said:straight/level line.
If it measures the dist between two points in space and time, how does it know if you took a less
than straight (longer) route?
Am I missing something?
Dave in Plano