profile hub?

It's a splined uicycle hub made by a company called profile. The hub is
the bit at the centre of the wheel, that all the spokes attach to, and
on to the ends of which the cranks fit. 4 seconds work on google came
up with 'this' (http://tinyurl.com/onl2u) picture of one, along with
matching cranks.

--
kington99

Dave

- what a thoroughly post-modern subversion of the cycling genre -
------------------------------------------------------------------------
kington99's Profile: http://www.unicyclist.com/profile/9417
View this thread: http://www.unicyclist.com/thread/47940

slight correction...the hub and crankset is called profile...the company
name is poznator. they mostly make bmx and mountain bike stuff but the
profile hub and crankset has abeen adapted for unis aswell.

--
trials_uni

TRIALS 4 LIFE !

'Check Out The Newbie Guide' (http://tinyurl.com/99yez)

*JONNY IS MY HERO!*
------------------------------------------------------------------------
trials_uni's Profile: http://www.unicyclist.com/profile/10953
View this thread: http://www.unicyclist.com/thread/47940

Actually i think it's a Poznantor hub by profile. it was named after
David poznantor who as far as i remember designed it. He also tested it
and desided on the current model which we all thank him for ! Profile
is the company and poznantor is the specailty hub!
cheers
by

--
vicuniclub
------------------------------------------------------------------------
vicuniclub's Profile: http://www.unicyclist.com/profile/10052
View this thread: http://www.unicyclist.com/thread/47940

<EDIT> ooops sorry your right i didnt read it correctly...my bad.
disregard my earlier post.

--
trials_uni

TRIALS 4 LIFE !

'Check Out The Newbie Guide' (http://tinyurl.com/99yez)

*JONNY IS MY HERO!*
------------------------------------------------------------------------
trials_uni's Profile: http://www.unicyclist.com/profile/10953
View this thread: http://www.unicyclist.com/thread/47940

profile makes all sorts of other bike goodies. company = profile. the
hub has a lifetime warranty and is arguably the strongest one
available.

--
markf

stuck in iowa and gainfully employed.
------------------------------------------------------------------------
markf's Profile: http://www.unicyclist.com/profile/8102
View this thread: http://www.unicyclist.com/thread/47940

the reason its so expensive is becaus of that no hold lifetime
warrenty...its been said that the nes KH/Onza hub/cranks are justa s
strong if not stronger...and definately lighter..profiles weigh a ton.

--
trials_uni

TRIALS 4 LIFE !
'My Gallery' (http://tinyurl.com/fculm)
'Check Out The Newbie Guide' (http://tinyurl.com/99yez)

*JONNY IS MY HERO!*
------------------------------------------------------------------------
trials_uni's Profile: http://www.unicyclist.com/profile/10953
View this thread: http://www.unicyclist.com/thread/47940

trials_uni said:

profiles weigh a ton.

Someone's exagerating like a zillion times.:p

--
saam

Ronnie said:

"Crippled but still keen, I salute you!"

my dream stock unicycle:'koxx' (http://tinyurl.com/do9yc)
my dream custom unicycle:'kh '
(http://www.unicyclist.com/forums/showthread.php?t=46723)
------------------------------------------------------------------------
saam's Profile: http://www.unicyclist.com/profile/9168
View this thread: http://www.unicyclist.com/thread/47940

ok not a ton but the set wieght like 3 libs

--
trials_uni

TRIALS 4 LIFE !
'My Gallery' (http://tinyurl.com/fculm)
'Check Out The Newbie Guide' (http://tinyurl.com/99yez)

*JONNY IS MY HERO!*
------------------------------------------------------------------------
trials_uni's Profile: http://www.unicyclist.com/profile/10953
View this thread: http://www.unicyclist.com/thread/47940

I would like to see 2 unicycles with the same set-up, except for the
hubs, one will have profiles, the others will have KH. Get a rider to
do the testing, and put each one through the same tests, like drops to
flat, with and then without a good roll-out, doing some street.

Then at the end of the testing, tell us how each one stood up, i think
that would end some questions about the hubs, but raise so many more
lol

--
Jerrick

from chosen:

can you give me a shoutout in your sig. some thing like i love
jonny....or jonny is the coolest. or be creative. but pleeeasssee can i
have a shoutout from you?

jonny
------------------------------------------------------------------------
Jerrick's Profile: http://www.unicyclist.com/profile/11632
View this thread: http://www.unicyclist.com/thread/47940

Jerrick said:

I would like to see 2 unicycles with the same set-up, except for the
hubs, one will have profiles, the others will have KH. Get a rider to
do the testing, and put each one through the same tests, like drops to
flat, with and then without a good roll-out, doing some street.

I think they would both hold out just fine. From what I've heard, it
takes more than a couple drops to break either one (like a zillion
drops, or one drop off an outhouse).

--
paco

Blah Blah Blah BACON Blah Blah Blah
--Harper a-la Catboy

768
------------------------------------------------------------------------
paco's Profile: http://www.unicyclist.com/profile/3715
View this thread: http://www.unicyclist.com/thread/47940

i invented em!

--
unijesse

I Brake for Unicyclist's
http://www.nickjantz.2ya.com

www.unicycletips.comformerly www.unicycle.2ya.com
------------------------------------------------------------------------
unijesse's Profile: http://www.unicyclist.com/profile/10868
View this thread: http://www.unicyclist.com/thread/47940

I dont think kh/onza is stronger I think it's about as strong tho.. but
it's prooven that the kh hub makes a way better wheel build(stronger
wheel)

--
maxisback

Quiters never win, winners never quit , the ones who never win and never
quit are just dumb
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/47940