Marzocchi seal removal

Quoted message said:

Help,

I have my Marzocchi Z2 superfly's apart, but cant get the oil seal
out. It is completely stuck. I've tried a lot of force with the
screwdriver, but it just wont budge. I guess it's becaue the seal
hasnt been changed since purchase in 99.

Any tips? I'm worried that if I try too much I might damage the seal
seat.

Cheers,
EF

It takes an incredible amount of force sometimes. Do you have the fork
lower protector to pry against? The leg of the fork may give out before the
seal budges without it.

Mike

Thanks for the help Mike. I couldnt get it to budge. I dont have the
marzocchie slider protector gadget if that is what you mean. I just
used a rag to protect the fork.

After an hour of struggling, I finally decided to have a cup of tea and
a rethink.

In the end I managed to get them out really easily. The trick is to
pour boiling water over the outer stanchion near the seals. This seems
to expand the stanchion enough to get the seals out easily without to
much force.

Cheers,
EF

Quoted message said:

Thanks for the help Mike. I couldnt get it to budge. I dont have the
marzocchie slider protector gadget if that is what you mean. I just
used a rag to protect the fork.

After an hour of struggling, I finally decided to have a cup of tea
and a rethink.

In the end I managed to get them out really easily. The trick is to
pour boiling water over the outer stanchion near the seals. This seems
to expand the stanchion enough to get the seals out easily without to
much force.

Cheers,
EF

Nice. Thanks for the tip.

It would've saved many bloody knuckles!!

Mike