Your opinion

Have you tried to put the wheel in the other way? Does it lean the same,
or hte other way?

If it leans the other way, it's your wheel that's non-true, not your
frame, try this!
If it's your wheel that's off-centre, you can correct it with a spoke
key, or have someone to do it for you (and unicycle.com should pay for
it if they sent you an untrue wheel)..

If that's not the case, replace the frame..
And I don't think you whould pay for the postage for this switch, at
all.

--
lleberg

I <3 my unicycle!
------------------------------------------------------------------------
lleberg's Profile: http://www.unicyclist.com/profile/8272
View this thread: http://www.unicyclist.com/thread/46242

llberg speaks the truth about the wheel swap and it's an easy test. But
I disagree with his plan of adjusting all the spokes to retrue the
wheel in an off center manner.

I can't tell for sure but it looks as if it has maincap style bearing
holders, the kind with two bolts that clamp each bearing to the frame.
If so, shim the frame up on the short side to center the wheel
temporarily until you get the new frame. Don't mess with the wheel.

--
harper

-Greg Harper

B L U E S H I F T

*jc is the only main man. there can be no other.*

This is still my nth post....*AWESOME!!!*
------------------------------------------------------------------------
harper's Profile: http://www.unicyclist.com/profile/426
View this thread: http://www.unicyclist.com/thread/46242

I was only refering to it it was the wheel that was off-centre..
If the wheel leans to the other side if you swap it, it is the wheel
that's off-centre, and it's that that should be corrected.

of course not if it's the frame that's crooked.

English ain't my mother-language, can be hard to express myself
sometimes..

--
lleberg

I <3 my unicycle!
------------------------------------------------------------------------
lleberg's Profile: http://www.unicyclist.com/profile/8272
View this thread: http://www.unicyclist.com/thread/46242

I learned this from Pete from our Seattle Area Riders group:

When high-production frames like the Quax are made, they are usually
not allowed a gradual enough cooling period. This can (but not always)
cause a slight warp. It's pretty much a game of chance whether you
will get a frame like that or not, but it looks like you did. I had a
Semcycle longneck frame like that, but I replaced it with a Nimbus
longneck and that worked great. But on the bright side, my Nimbus
29er, Nimbus X, Nimbus Longneck, and both of my Torker CXs are almost
perfectly straight.

--
UniTyler

'Tyler's Macro Photography' (http://tcox6.photosite.com)
------------------------------------------------------------------------
UniTyler's Profile: http://www.unicyclist.com/profile/6120
View this thread: http://www.unicyclist.com/thread/46242

harper said:

llberg speaks the truth about the wheel swap and it's an easy test. But
I disagree with his plan of adjusting all the spokes to retrue the
wheel in an off center manner.

I can't tell for sure but it looks as if it has maincap style bearing
holders, the kind with two bolts that clamp each bearing to the frame.
If so, shim the frame up on the short side to center the wheel
temporarily until you get the new frame. Don't mess with the wheel.

I see what ur saying, but i know for surre that it is the frame, i have
had it checked by an engineer even,
so should i not worry about the few millimetres of space lacking from
one side, or should i send it back, i am confused cos it has been
disassembled ready to send back, but i really want to ride😄

--
silverfridge
------------------------------------------------------------------------
silverfridge's Profile: http://www.unicyclist.com/profile/11533
View this thread: http://www.unicyclist.com/thread/46242

Many unicycle frames are not exactly precision made. Some are out of
alignment.

Two options you can check for before going through the time to send the
frame back:

1) Check the bearing caps that are welded to the frame. See if there
is any weld splatter or other gunk preventing the bearing from fully
seating in the bearing cap. If there is gunk in their obstructing the
bearing then you can grind it off or file it off.

2) Unicycle.com UK has a FAQ on 'how to straighten your frame'
(http://tinyurl.com/2g3uf). You can look at that and determine if it
applies to your frame. A good bike shop should also have a fork
straightening tool and measuring tools to check the frame. A good bike
shop or a bike shop experienced with frame repairs could get the legs
straight again if that's the problem. Or you can try it yourself using
the Unicycle.com UK FAQ. A bike should would possibly be able to do a
better job.

A third option is to fashion a shim to fit in the bearing cap of the
short leg if one leg is indeed longer than the other.

--
john_childs

john_childs (att) hotmail (dott) com
Gallery: http://gallery.unicyclist.com/john_childs
'Unicycling Bookmark List' (http://backcountry.unicyclist.com/) ::
'World Clock' (http://tinyurl.com/a99y3)
------------------------------------------------------------------------
john_childs's Profile: http://www.unicyclist.com/profile/449
View this thread: http://www.unicyclist.com/thread/46242

harper said:

If so, shim the frame up on the short side to center the wheel
temporarily until you get the new frame. Don't mess with the wheel.

Just don't over tighten the bearing holders once you do. Once you shim
them, they'll have a smaller internal diameter and there will no longer
be an even amount of pressure applied to the bearings.

As a result, this can happen - http://tinyurl.com/7fnxu (although that
wasn't from shimmed bearing holders...they were too small to begin
with)

Andrew

--
andrew_carter

...well that's what i think anyway.
*'unicycling tips and tutorials' (http://www.unicycle.2ya.com) |
'my photos and videos' (http://gallery.unicyclist.com/andrew) |
'\\"dancing about architecture\\"'
(http://www.dancingaboutarchitecture.com.au)* (coming soon...)
------------------------------------------------------------------------
andrew_carter's Profile: http://www.unicyclist.com/profile/1052
View this thread: http://www.unicyclist.com/thread/46242