Could anyone tell me whether the brakes fitted to an OCR1 and OCR3 are the
same? I bought some secondhand OCR1 ones off ebay, and they're identical,
and cr*p.
2003 if it makes any difference.
A community for cyclists, gear, training and racing.
UK and Europe · Public discussion
This thread is locked and is currently read-only.
Thread navigation
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
Could anyone tell me whether the brakes fitted to an OCR1 and OCR3 are the
same? I bought some secondhand OCR1 ones off ebay, and they're identical,
and cr*p.
2003 if it makes any difference.
in message <[email hidden]>, Steve
(') said:Could anyone tell me whether the brakes fitted to an OCR1 and OCR3 are
the same? I bought some secondhand OCR1 ones off ebay, and they're
identical, and cr*p.2003 if it makes any difference.
Don't know about 03, but 04 OCR1 had Campag Mirage. That's second from
the bottom of Campagnolo's range, but Campag don't make [censored]. I'd be
enormously surprised if any OCR3 ever came with Campag brakes, because
at that price point there's no way Giant could afford to fit them.
--
[email hidden] (Simon Brooke) http://www.jasmine.org.uk/~simon/
to err is human, to lisp divine
;; attributed to Kim Philby, oddly enough.
Steve said:Could anyone tell me whether the brakes fitted to an OCR1 and OCR3 are the
same? I bought some secondhand OCR1 ones off ebay, and they're identical,
and cr*p.2003 if it makes any difference.
You can find the specs of Giant's bike back to 2001 on
their website - here's a link to the 2003 OCR range:
http://www.giantbicycle.com/uk/030.000.000/030.000.000.asp?year=2003&range=69
The 2003 OCR1 should have Shimano 105, the 2003 OCR3 should have
Tektro Dual Pivot 39-49mm. Both should be good enough brakes, what
are your brake pads like as that can make a lot of difference ?
I have a 2003 OCR2 and its got Shimano Tiagra brakes which are fine,
they got even better when I fitted Ultegra brake pads though...
Doug
Douglas Steel said:Steve said:Could anyone tell me whether the brakes fitted to an OCR1 and OCR3 are the
same? I bought some secondhand OCR1 ones off ebay, and they're identical,
and cr*p.2003 if it makes any difference.
You can find the specs of Giant's bike back to 2001 on
their website - here's a link to the 2003 OCR range:http://www.giantbicycle.com/uk/030.000.000/030.000.000.asp?year=2003&range=69
Many thanks. That helps heaps!
Quoted message said:
The 2003 OCR1 should have Shimano 105, the 2003 OCR3 should have
Tektro Dual Pivot 39-49mm. Both should be good enough brakes, what
are your brake pads like as that can make a lot of difference ?
It's the Tektro ones I've now got 2 sets of... all the chrome falls
off after about a year so they look cr*p as well!. I've upgraded the
pads to DuraAce, so they should be ok!
Quoted message said:
I have a 2003 OCR2 and its got Shimano Tiagra brakes which are fine,
they got even better when I fitted Ultegra brake pads though...Doug
Part of the problem is that I'm well overweight and 25 years driving a
computer without ever learning to type properly has left me a bit
arthritic as well. However, when I dare to get my Softride out, which is
DA throughout, I can stop fine.
Maybe I con do something with the rime ( Alexrims DA13 whoever they are )
to improve the grip, or maybe I should get a decent set of wheels instead (:
Thanks for the info,
Steve
Steve said:
Maybe I con do something with the rime ( Alexrims DA13 whoever they are )
to improve the grip, or maybe I should get a decent set of wheels instead (:
Get a decent set of brake pads - a much cheaper solution. As someone
else said, Dura Ace pads are OK but the ones everyone recommends are
the salmon coloured Kool Stops available from Wiggle.
http://www.wiggle.co.uk/ProductDetail.aspx?W=0&Manufacturer=&UberCatName=&Cat=cycle&CategoryName=Brake%20Blocks&ProdID=5300005952&UberCat=0
--
Tony
"The best way I know of to win an argument is to start by being in the
right."
- Lord Hailsham
Tony Raven said:Steve said:
Maybe I con do something with the rime ( Alexrims DA13 whoever they are )
to improve the grip, or maybe I should get a decent set of wheels instead (:Get a decent set of brake pads - a much cheaper solution. As someone
else said, Dura Ace pads are OK but the ones everyone recommends are
the salmon coloured Kool Stops available from Wiggle.
http://www.wiggle.co.uk/ProductDetail.aspx?W=0&Manufacturer=&UberCatName=&Cat=cycle&CategoryName=Brake%20Blocks&ProdID=5300005952&UberCat=0
I think the postage down to NZ would cost more than the pads! I'll see if
I can find some local ones.
Cheers,
Steve
Steve said:
I think the postage down to NZ would cost more than the pads! I'll
see if I can find some local ones. Cheers,
Otherwise from NZ try Sheldon Brown who ships to cyclists all over the
world.
http://sheldonbrown.com/harris/brakeshoes.html
--
Tony
"The best way I know of to win an argument is to start by being in the
right."
- Lord Hailsham
"Steve" <[email hidden]> wrote in message
news:[email hidden]...
Quoted message said:Part of the problem is that I'm well overweight and 25 years driving a
computer without ever learning to type properly has left me a bit
arthritic as well. However, when I dare to get my Softride out, which is
DA throughout, I can stop fine.
It's not adjustment is it? If Dual Pivots have too much cable slack (ie,
pads more than a MM or two from the rim) then they're absolutely terrible.
I'm running some freebie cannondale dual pivots (ta to that bloke off here,
Pete I think) and they're great. Don't look special, but I can do stoppies
on my road bike now 😉.
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.