Cycling Equipment · Public discussion

Barbeir Carbone pump ?

Started by rs · · Last activity · 9 posts · 347 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
2 January 2006
Last activity
3 January 2006
Original author
rs
Posts
9
Discussion status
Public discussion
Total views
347
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–9 of 9
Posts remain in their original chronological order.

Text size
  1. I purchased a used Road Bike and it came with a few extras including this neat
    little Barbieri Carbone pump. Except it doesn't really seem to work very
    well, if at all. Is anyone using one of these? And is mine missing a part?
    here's a link to an image of the head:

    www.rickschiller.com/barbiericarbone.jpg

  2. rs said:

    I purchased a used Road Bike and it came with a few extras including this neat
    little Barbieri Carbone pump. Except it doesn't really seem to work very
    well, if at all. Is anyone using one of these? And is mine missing a part?
    here's a link to an image of the head:

    www.rickschiller.com/barbiericarbone.jpg

    I've been using one for the last couple of years and have been happy
    with it. The best "micro" pump I've used; I went through several
    self-destructing Zefals previously. It takes me 300 strokes (less than
    5 minutes) to get approx. 100psi in a 23mm 700c tire, which may seem
    excessive to those that carry larger pumps. All that I notice missing
    in your photo is the dust cap. If it's not producing air, there might
    be internals missing.

    Alan

  3. rs said:

    I purchased a used Road Bike and it came with a few extras including
    this neat little Barbieri Carbone pump. Except it doesn't really
    seem to work very well, if at all. Is anyone using one of these?

    It must be held on to the valve firmly and squarely to prevent leakage but
    otherwise mine works well. Unlike with other pumps, you need to hold the
    protruding tip of the pump from the opposite side of the wheel while
    operating the piston from the other side.

    High pressure is possible, but still a CO2 inflator in addition saves
    work. I take this combination when I don't want to carry around a long
    pump off the bike, or when carrying a battery under the top tube. The
    weight saving is a bonus too, at the financial cost of one 16g cartridge
    per puncture.

    ~PB

  4. I tried it on a normal rim with much of the presta valve protuding and it
    worked fine, so thanks for the comments. Does take a lot of pumping but
    seemed to work. The other bike has v-rims with very little valve protuding
    and it didn't seem to get enough of the valve into the head of the pump to
    work properly. It certainly is small and light.

    In article <[email hidden]>,
    [email hidden] says...

    Quoted message said:


    rs said:

    I purchased a used Road Bike and it came with a few extras including this


    neat

    Quoted message said:
    Quoted message said:

    little Barbieri Carbone pump. Except it doesn't really seem to work very
    well, if at all. Is anyone using one of these? And is mine missing a


    part?

    Quoted message said:
    Quoted message said:

    here's a link to an image of the head:

    www.rickschiller.com/barbiericarbone.jpg

    I've been using one for the last couple of years and have been happy
    with it. The best "micro" pump I've used; I went through several
    self-destructing Zefals previously. It takes me 300 strokes (less than
    5 minutes) to get approx. 100psi in a 23mm 700c tire, which may seem
    excessive to those that carry larger pumps. All that I notice missing
    in your photo is the dust cap. If it's not producing air, there might
    be internals missing.

    Alan

  5. rs said:

    I purchased a used Road Bike and it came with a few extras including this
    neat little Barbieri Carbone pump. Except it doesn't really seem to work
    very well, if at all. Is anyone using one of these? And is mine missing
    a part? here's a link to an image of the head:

    www.rickschiller.com/barbiericarbone.jpg

    Mine works very well, it just takes awhile because it's so small.

    Matt O.

  6. [email hidden] (rs) wrote in
    news:[email hidden]:

    Quoted message said:

    I tried it on a normal rim with much of the presta valve protuding and
    it worked fine, so thanks for the comments. Does take a lot of pumping
    but seemed to work. The other bike has v-rims with very little valve
    protuding and it didn't seem to get enough of the valve into the head of
    the pump to work properly. It certainly is small and light.

    Get some tubes with longer valve stems. Or attach extenders.

  7. [email hidden] (rs) wrote in
    news:[email hidden]:

    Quoted message said:

    And is
    mine missing a part? here's a link to an image of the head:

    www.rickschiller.com/barbiericarbone.jpg

    Yours is missing the dust cap. The weak point of this pump is the dust cap
    holder, which breaks very easily. I suppose you could wrap a condom over the
    pump head to keep it clean.

  8. rs said:

    I purchased a used Road Bike and it came with a few extras including this neat
    little Barbieri Carbone pump. Except it doesn't really seem to work very
    well, if at all. Is anyone using one of these? And is mine missing a part?
    here's a link to an image of the head:
    www.rickschiller.com/barbiericarbone.jpg

    Sadly, I sold ten of those.
    Try to return it for a bicycle pump.

    --
    Andrew Muzi
    www.yellowjersey.org
    Open every day since 1 April, 1971

  9. A Muzi said:
    rs said:

    I purchased a used Road Bike and it came with a few extras including
    this neat little Barbieri Carbone pump. Except it doesn't really
    seem to work very well, if at all. Is anyone using one of these?
    And is mine missing a part? here's a link to an image of the head:
    www.rickschiller.com/barbiericarbone.jpg

    Sadly, I sold ten of those.
    Try to return it for a bicycle pump.

    Heh.

    Bill "Hickey impersonator" S.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.