rec.sport.unicycling · Public discussion

KH 29er xc uni

Started by musketman · · Last activity · 5 posts · 326 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
rec.sport.unicycling
Published
11 December 2005
Last activity
12 December 2005
Original author
musketman
Posts
5
Discussion status
Public discussion
Total views
326
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. anybody have one of these beasts? Im sure there pretty good since there
    kris holm uni's. Plz if ya got one tell me what you think of them. I
    think i want to get one for my longer rides i do, and the U.P. tour de
    yoop coming up next year.

    P.s. if you slap an 05 24" kris holm wheel set in one of these 05 29"
    ers will it fit in there properly?

    --
    musketman
    ------------------------------------------------------------------------
    musketman's Profile: http://www.unicyclist.com/profile/9214
    View this thread: http://www.unicyclist.com/thread/45326

  2. musketman said:

    think i want to get one for my longer rides i do, and the U.P. tour de
    yoop coming up next year.

    The shortest cranks available for the KH/Onza is the 127 mm cranks,
    which might not be short enough on a 29" for a long tour.

    musketman said:

    P.s. if you slap an 05 24" kris holm wheel set in one of these 05 29"
    ers will it fit in there properly?

    I would think so, since it's the same hub, the spacing and everything
    should be the same.

    --
    Gilby
    ------------------------------------------------------------------------
    Gilby's Profile: http://www.unicyclist.com/profile/1
    View this thread: http://www.unicyclist.com/thread/45326

  3. Gilby said:

    The shortest cranks available for the KH/Onza is the 127 mm cranks,
    which might not be short enough on a 29" for a long tour.

    It should be fine. If it is flat short would be nicer, though.

    --
    UniTyler
    ------------------------------------------------------------------------
    UniTyler's Profile: http://www.unicyclist.com/profile/6120
    View this thread: http://www.unicyclist.com/thread/45326

  4. musketman said:

    I
    think i want to get one for my longer rides i do, and the U.P. tour de
    yoop coming up next year.

    A crank length of 127 mm is OK (for touring on a 29" in general). It
    might be difficult to ride with fast Cokers, but shorter cranks may
    not help that much. However, I'm not sure that the original tyre for
    the 29" XC is very well suited for touring on asphalt. You may want to
    swap it for something slicker, Big Apple comes to mind.

    Klaas Bil - Newsgroup Addict
    --
    "erectile function trumps public image - David Stone, commenting on the importance of seat comfort"

  5. musketman said:


    P.s. if you slap an 05 24" kris holm wheel set in one of these 05 29"
    ers will it fit in there properly?

    Yes, it will fit fine. The frame width and bearing housing on the 24"
    and 29" frames are identical. I just had a look in our warehouse and
    the only difference between the frames is that the 29" has longer fork
    blades.

    The only problem you will run into is if you swap in a 24" wheelset and
    then want to mount some brakes. The brake mounts on the 29" frame will
    be too high for a 24" wheel.

    --
    peter.bier

    -Peter Bier
    ------------------------------------------------------------------------
    peter.bier's Profile: http://www.unicyclist.com/profile/1506
    View this thread: http://www.unicyclist.com/thread/45326

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.