Ted shuffled out of his cave and grunted these great (and sometimes not
so great) words of knowledge:
Quoted message said:We have done rough in and ready to select a kitchen. This is all new
constuction.
I have looked at KraftMaid at 10,000., Kemper at 10,000. and
Aristocraft at 5,000. We are trying to look at apples for apples,
i.e. identical cabinet configuration.
What do you believe would make a good cabinet installation?
Stay away from particle board and composition board. They are going to
warp, sag and/or delaminate in a couple of years.
You want a solid wood cabinet. I mean everything - sides, top, doors,
shelves, etc. A very good, less pricey alternative is 5 ply (or more
plys ) plywood with a 1/16" (or more ) solid wood veneer on all the
surfaces including the edges. Stay away from the paper/plastic veneer
no matter what they tell you.
The solid wood (or solid wood veneer ) will allow you to use
conventional cleaning products and, if you ever decide to change the
appearance of the cabinets, wood is relatively easy to strip and refinish.