Hi all
just wondered if anyone knows what sort of angle (relative to the horizontal) endbars are supposed
to be set up at? Thanks for any useful info.
Me
A community for cyclists, gear, training and racing.
UK and Europe · Public discussion
This thread is locked and is currently read-only.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
Hi all
just wondered if anyone knows what sort of angle (relative to the horizontal) endbars are supposed
to be set up at? Thanks for any useful info.
Me
FM said:Hi all
just wondered if anyone knows what sort of angle (relative to the horizontal) endbars are supposed
to be set up at? Thanks for any useful info.Me
Start at 45 degrees and carry the key around to make adjustments to them. Can take a few rides to
get them right.
Ivor Cave
FM said:Hi all
just wondered if anyone knows what sort of angle (relative to the horizontal) endbars are supposed
to be set up at? Thanks for any useful info.
Start off by deciding if you really need them. A lot of people fit them to adjust the handlebar
position , instead of changing the bars/stem. This means they are often fitted at odd angles, eg
straight up, leading to nasty internal injuries in crashes. Ask why are are you fitting them first.
Of course if you just want another hand position, then typically they are normally fitted so they
are basically in line with the stem, and then adjusted so that they fit flat in the palm with the
fore arm straight.
Steve
On Mon, 04 Aug 2003 02:21:48 +0100, FM did issue forth:
Quoted message said:Hi all
just wondered if anyone knows what sort of angle (relative to the horizontal) endbars are supposed
to be set up at? Thanks for any useful info.
Personally, I find having them at approximately the same angle as the stem is preferable.
Just remember, barends pointing straight up are BAD, unless you particularly want to lose some
internal organs during your next unplanned flight over the bars.
Huw "Bicycular hari-kiri" Pritchard
Thanks guys
"Huw Pritchard" <[email hidden]> wrote in message
"]news:[email hidden]...
Quoted message said:On Mon, 04 Aug 2003 02:21:48 +0100, FM did issue forth:
Quoted message said:Hi all
just wondered if anyone knows what sort of angle (relative to the horizontal) endbars are
supposed to be set up at? Thanks for any useful info.Personally, I find having them at approximately the same angle as the stem is preferable.
Just remember, barends pointing straight up are BAD, unless you particularly want to lose some
internal organs during your next unplanned flight over the bars.Huw "Bicycular hari-kiri" Pritchard
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.