Mountain Bikes · Public discussion

Fix tacoed wheel?

Started by Dave Mennenoh · · Last activity · 8 posts · 679 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
26 August 2005
Last activity
31 August 2005
Original author
Dave Mennenoh
Posts
8
Discussion status
Public discussion
Total views
679
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–8 of 8
Posts remain in their original chronological order.

Text size
  1. Can a mildly tacoed wheel be fixed? I can true a wheel pretty well, but my
    front wheel is not so much out of true as it is tacoed - the thing is, all
    the spokes are tight... so I'm not sure where to begin.

    thanks

    --
    Dave -
    www.blurredistinction.com/director
    www.macromedia.com/go/team

  2. Dave Mennenoh said:

    Can a mildly tacoed wheel be fixed? I can true a wheel pretty well, but my
    front wheel is not so much out of true as it is tacoed - the thing is, all
    the spokes are tight... so I'm not sure where to begin.

    thanks

    --
    Dave -
    www.blurredistinction.com/director
    www.macromedia.com/go/team

    I've tacoed wheels on the trail and brought them back into rough shape
    by removing them from the bike, taking the wheel in both hands,
    bringing it up over my head and WHANGING it down onto the trail a whole
    bunch of times. It actually works remarkably well.

    /s

  3. <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    Dave Mennenoh said:

    Can a mildly tacoed wheel be fixed? I can true a wheel pretty well, but
    my
    front wheel is not so much out of true as it is tacoed - the thing is,
    all
    the spokes are tight... so I'm not sure where to begin.

    thanks

    --
    Dave -
    www.blurredistinction.com/director
    www.macromedia.com/go/team

    I've tacoed wheels on the trail and brought them back into rough shape
    by removing them from the bike, taking the wheel in both hands,
    bringing it up over my head and WHANGING it down onto the trail a whole
    bunch of times. It actually works remarkably well.

    /s

    yep, it'll certainly get it right enough to get you out....

    but you might have to give up the front brakes anyway...

  4. Thanks - but essentially it's in "rough" shape now. I made it out fine - I
    run disc brakes so there was no rubbing issue. What I'm wondering now is can
    the wheel be brough back into true or is it time for a new wheel?

    --
    Dave -
    www.blurredistinction.com/director
    www.macromedia.com/go/team

  5. Dave Mennenoh said:

    Thanks - but essentially it's in "rough" shape now. I made it out fine - I
    run disc brakes so there was no rubbing issue. What I'm wondering now is can
    the wheel be brough back into true or is it time for a new wheel?

    --
    Dave -
    www.blurredistinction.com/director
    www.macromedia.com/go/team

    The integrity of that rim has been compromised beyond repair to be of
    practical use. Replace the rim, preferably with the same kind of rim,
    or one that has the same diameter at the spoke holes so you can reuse
    the old spokes and save a few bucks (if the spokes are still good).

    JD

  6. Thanks JD.

    --
    Dave -
    www.blurredistinction.com/director
    www.macromedia.com/go/team

  7. Dave Mennenoh said:

    Can a mildly tacoed wheel be fixed?

    Years ago I had a tacoed rear wheel once that wouldn't clear the chainstays. The LBS straightened it out into rolling shape by retensioning the spokes, but of course it provided an unsteady ride afterwards. One boring winter evening I disassembled the rim from the spokes and straightened it out by bending it "counter-taco" by placing it across a plank on the floor and then pushing down on the high sections until the rim was able to lie flat on the floor again.

    Then I reassebled the wheel, which took to trueing rather well. Such a rough treatment SHOULD have weakened the rim, but by now that wheel has seen several years of regular use and it's still holding up.

  8. dabac said:
    Dave Mennenoh said:

    Can a mildly tacoed wheel be fixed?

    Years ago I had a tacoed rear wheel once that wouldn't clear the
    chainstays. The LBS straightened it out into rolling shape by
    retensioning the spokes, but of course it provided an unsteady ride
    afterwards. One boring winter evening I disassembled the rim from the
    spokes and straightened it out by bending it "counter-taco" by placing
    it across a plank on the floor and then pushing down on the high
    sections until the rim was able to lie flat on the floor again.

    Then I reassebled the wheel, which took to trueing rather well. Such a
    rough treatment SHOULD have weakened the rim, but by now that wheel has
    seen several years of regular use and it's still holding up.

    Don't fool yourself, pal. It did weaken the rim and significantly so.
    The big hole in your story is "several years of regular use". What you
    consider regular use may not be what others consider regular use. I've
    never had a rear wheel last "several years of regular use", even if it
    was not tacoed.

    JD

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.