OK, I'm looking for someone who can speak from experience and not someone who'll simply be "reading the rule book" regarding cracks in an OCLV carbon frame. I've heard all the chanting that I'm supposed to send it back to Trek and have them inspect it, etc. But the bikes aren't under warranty, the 5500 was repainted privately, and the other purchased outside of retail channels (the TTT frame).
I have 2 Trek OCLV frames, a 1999 5500 and a 2003 Team Time Trial. The 5500 has developed hairline cracks at positions that I guess would be at the end of the lugs for the bottom bracket, about 4" up from the bottom bracket on the seat and down tubes. The cracks are perfectly straight, which is what leads me to believe they are located at the place where the bottom bracket component of the frame mates with the tube heading upward.
My greater concern is on the TTT bike. I have a similar hairline crack at the point where I would guess the downtube is mating to the lug that is the headset tube. This one is pefectly straight. The other is at the point where the top of the rear triangle blends into the seat tube, at the point just in front of the rear brake. It is only on the left side of the frame, and is a jagged line. It's not like the other hairline cracks that are apparently following a point where the tubes mate.
I've heard that TREK paint jobs are not the best, and the paint itself can crack from normal usage. i.e. the paint is not flexible, the carbon is, so the paint shows the cracks even though the frame is still ridable/reliable without any real structural problems. This, of course, is what I hope to be experiencing. But the "jagged" line of the crack on the TTT frame has me worried. Maybe someone knows of inherent problems with this frame (it's also the Equinox 11 frame)?
Thanks... Chip