Newbie Questions

"Cubster" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Hello all,

I am seriously considering getting a recumbent, in part because a serious shoulder injury makes
the handlebar position on my road bike impossibly

<>snip>

Quoted message said:

4. Anyone ever heard of Action Bent bikes (www.actionbent.com.) Their entry-level $695 bike
claims to have a 20" seat hight, but I wonder if

it's

Quoted message said:

truly in the same league as the Cyclegenius and RANS bikes.

<snip>

I have the Action Bent Tidal Wave, and so far, it's bneen a pleasant surprise. I also own a Tour
Easy, and am pleased by how well the Tidal Wave stacks up. Basically, Action Bent frames are made in
Taiwan and imported here. Lots of other bent frames are Taiwanese as well, so this need not put you
off. Fit and finish are fine. The seat may allow you to get your legs down easier then some others,
due to its relatively narrow base.

Tom Thompson

Odd you would mention CycleGenius, that company was going to be the U.S. Distributor for China
Mascot and backed out due to high shipping costs. I cannot speak for CycleGenius, but I think they
would have done well had they carried the China Mascot line. I wonder what happened to the C-M
Titanium frame that came out 2 years ago?

Action Bent has become more popular offering a bent at only $695....I thought it was now at $645.00?
*******************************************
"Tom Thompson" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Cubster" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Hello all,

I am seriously considering getting a recumbent, in part because a

serious

Quoted message said:

Quoted message said:

shoulder injury makes the handlebar position on my road bike impossibly

Quoted message said:

<>snip>

Quoted message said:

4. Anyone ever heard of Action Bent bikes (www.actionbent.com.) Their entry-level $695 bike
claims to have a 20" seat hight, but I wonder if

it's

Quoted message said:

truly in the same league as the Cyclegenius and RANS bikes.

<snip>

I have the Action Bent Tidal Wave, and so far, it's bneen a pleasant surprise. I also own a Tour
Easy, and am pleased by how well the Tidal

Wave

Quoted message said:

stacks up. Basically, Action Bent frames are made in Taiwan and imported here. Lots of other bent
frames are Taiwanese as well, so this need not

put

Quoted message said:

you off. Fit and finish are fine. The seat may allow you to get your legs down easier then some
others, due to its relatively narrow base.

Tom Thompson

Hi Robyn, Recumbent bike shops in the LA area include:
1. People Movers, in the city of Orange They have exclusively recumbents and trikes and I believe
they will let you try out anything.
2. Alan's Family Bicycle Shop, in Oceanside. They have some recumbents, and you can try them out in
a limited area. I believe that you can take longer rides on the bikes if you make arrangements
with the store.

There is also a bike shop in Coronado (San Diego area), located on Orange Avenue in Coronado.
Unfortunately, I don't remember the name of the store. When I was there, just to see what they had,
I was surprised at the selection they had - Cyclegenius, RANS, Greenspeed, Burley, and a few more. I
don't know what their try-out policy is, though.

With any of these stores, I would call ahead and see what they have available first.

Good luck!

Diane and Wayne GRR, RANS Screamer, Haluzak Horizon

"Cubster" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Hello all,

I am seriously considering getting a recumbent, in part because a serious shoulder injury makes
the handlebar position on my road bike impossibly

Quoted message said:

But of course I'm loaded with questions, and hope some of you experts out

there

Quoted message said:

can provide a little guidance. Here are a few:

1. Because of my shoulder problems, I am wondering if I would be better

off

Quoted message said:

with under the column steering, rather than above. Anyone out there with shoulder injuries
(unrepaired rotator cuff tear, in my case) who has an opinion?

2. I am short, just like the man who wrote about his four foot eleven

wife (I

Quoted message said:

beat her by about 2/3 of an inch!) But I don't have $3,000 to spend on a

bike.

Quoted message said:

I'm looking at the Cyclegenius and the RANS Tailwind to begin with -- any other suggestions under
$1500 (the more under the better!)?

3. Not only am I short, but I have a very small car, a VW Bug. Will I be

able

Quoted message said:

to easily put a recumbent on a hatchback rack to transport it to a better riding area?

4. Anyone ever heard of Action Bent bikes (www.actionbent.com.) Their entry-level $695 bike
claims to have a 20" seat hight, but I wonder if

it's

Quoted message said:

truly in the same league as the Cyclegenius and RANS bikes.

5. Anyone know of a bike shop in Los Angeles where I might be able to

find

Quoted message said:

(and try) these bikes?

OK, that's probably enough to start! Many thanks in advance.

Best, Robyn

I rode a DF for a couple of years with a torn rotator cuff and that was no fun. I had it fixed but
the other one is starting to act up. I am currently riding a P38 with above seat steering and am
reasonably comfortable. I do have the tilt steering option and having the handbars closer to me
helps. I believe that under seat would definitely be more comfortable.

My advice would be to go with under seat steering if you are having shoulder problems with no
anticipated fix in the works.

Carl Morahan

PS. The first bad shoulder was fixed via surgery and came out terrific. It did take about 13 months
to get back on a DF without pain. Now my other shoulder is bad as well as my back.

----- Original Message ----- From: "Cubster" <[email hidden]> Newsgroups:
alt.rec.bicycles.recumbent Sent: Sunday, July 27, 2003 2:49 PM Subject: Newbie Questions

1. Because of my shoulder problems, I am wondering if I would be better off

Quoted message said:

with under the column steering, rather than above. Anyone out there with shoulder injuries
(unrepaired rotator cuff tear, in my case) who has an opinion?

In article <[email hidden]>, [email hidden] says...

Quoted message said:

Odd you would mention CycleGenius, that company was going to be the U.S. Distributor for China
Mascot and backed out due to high shipping costs. I cannot speak for CycleGenius, but I think they
would have done well had they carried the China Mascot line. I wonder what happened to the C-M
Titanium frame that came out 2 years ago?

I do not believe the Ti frame has made it to production yet. IIRC, a 650c rear 406 front was also
planned. I think given time, CG will gradually move up the performance ladder. At lot depends on
sales I'm sure. I think if I were them, I would be a little rattled by the Bike- E demise. Bike E
had a good product and was getting good placement. Too bad thet did not have a sound business plan.
I hope that the Bike E situation was a good learning example by CG and Bacchetta.

Saturday, I was impressed with CG's CGX3.0 at $450, I think this might be the Giant Killer that
could put recumbents into The Sports retail outlets like "Sun & Ski" Oshman's and similar retail
chains. If I were a casual rider, I'd spend $450 on a bike. If I were a casual rider, I'd start
looking in the sporting goods retail stores in the mall. If I were in Adam and Danny's shoes, I'd
make sure I could deliver 3 or 4 thousand CGX 3.0 and go after the mass market.

--
Cletus D. Lee Bacchetta Giro Lightning Voyager clee.orgclee.orgOpen ↗
- Bellaire, TX USA -

"Cletus D. Lee" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

In article <[email hidden]>, [email hidden] says...

Quoted message said:

Odd you would mention CycleGenius, that company was going to be the U.S. Distributor for China
Mascot and backed out due to high shipping costs.

I

Quoted message said:

Quoted message said:

cannot speak for CycleGenius, but I think they would have done well had

they

Quoted message said:

Quoted message said:

carried the China Mascot line. I wonder what happened to the C-M

Titanium

Quoted message said:

Quoted message said:

frame that came out 2 years ago?

I do not believe the Ti frame has made it to production yet. IIRC, a 650c rear 406 front was also
planned. I think given time, CG will gradually move up the performance ladder. At lot depends on
sales I'm sure. I think if I were them, I would be a little rattled by the Bike- E demise. Bike E
had a good product and was getting good placement. Too bad thet did not have a sound business
plan. I hope that the Bike E situation was a good learning example by CG and Bacchetta.

Saturday, I was impressed with CG's CGX3.0 at $450, I think this might be the Giant Killer that
could put recumbents into The Sports retail outlets like "Sun & Ski" Oshman's and similar retail
chains. If I were a casual rider, I'd spend $450 on a bike. If I were a casual rider, I'd start
looking in the sporting goods retail stores in the mall. If I were in Adam and Danny's shoes, I'd
make sure I could deliver 3 or 4 thousand CGX 3.0 and go after the mass market.

Gotta admit, it's the most promising entry level bent in a long while. If they can swing the supply,
it could be the first mainstream bent.