The teeth on the second and third cogs on my Record (Chorus?) 9 speed cassette have some minor damage - the teeth are "hooked" just slightly so that they make noise with a new, clean chain.
Is it worth trying to grind this material off so that the teeth are smooth, or should I just bite the bullet and buy a new part (3 cog carrier set) for $40?
If they're Record, they're titanium...any problem taking a Dremel tool to titanium?
The teeth on the second and third cogs on my Record (Chorus?) 9 speed cassette have some minor damage - the teeth are "hooked" just slightly so that they make noise with a new, clean chain.
Is it worth trying to grind this material off so that the teeth are smooth, or should I just bite the bullet and buy a new part (3 cog carrier set) for $40?
If they're Record, they're titanium...any problem taking a Dremel tool to titanium?
Lee
Wouldn't bother. they are just getting worn a bit...as long as they don't skip, turn up yer Ipod.
"Qui si parla Campagnolo" <[email hidden]> wrote in message news:[email hidden]...
Quoted message said:
Lee said:
The teeth on the second and third cogs on my Record (Chorus?) 9 speed cassette have some minor damage - the teeth are "hooked" just slightly so that they make noise with a new, clean chain.
Is it worth trying to grind this material off so that the teeth are smooth, or should I just bite the bullet and buy a new part (3 cog carrier set) for $40?
If they're Record, they're titanium...any problem taking a Dremel tool to titanium?
Lee
Wouldn't bother. they are just getting worn a bit...as long as they don't skip, turn up yer Ipod.
If they're Record, the top 4 cogs are titanium and don't have great longevity - it depends on your riding style, size, etc. but I went through the 17/19 on mine afetr only about 2500 miles. Replaced it with the corresponding Chorus part which has quasi-infinite longevity. It works to mix/match a hybrid Record/Chorus cassette - I still have ti 23 and 25 on my 12-25 cassette but hardly use them. Can't imagine that yours would have a good functional outcome or lifespan if you filed the teeth. As Peter said, use it up and replace when it skips, which may be soon.
Agree, personally, I find things like chains, cassettes and brake pads to be "consumables". Unless you're racing or need that special edge, I tend to buy the cheapest stuff and use it up.
Campy Veloce cassettes are very reasonably priced at about $60-80 each. I have both a Record 9 cassette and a Veloce 9 and in your hand, you can definitely feel a difference. Mount them onto a wheel and you don't. Mount it on a bike, there's even less of a difference. Add your body weight and well, any perceived difference is rounded out.