chainring

John Pitcock (nospam) said:

Where is a good place to buy a replacement 36 tooth middle chainring formy
Shimano Exage chainset?

What do I need to specify to ensure I get the correct one?

(There's so many combinations of sizes etc shops don't stock them all).

Birmingham

You need to knwo the PCD or BCD (samae thing) its the distance of the
circle that the bolt holes lie on. Might be 110mm, might be more or
less (my 1986 Deore is 74 and 110mm). Count the number of bolts or arms
too. Then contact somewhere like Settle Cycles or Spa Cycles they have
loads of these. I just got a 48T for my old Deore chainset from Settle
for £15.

On 07/08/2005 11:19:31 'John Pitcock' j-pitcock(nospam)@msn.com said:

Where is a good place to buy a replacement 36 tooth middle chainring for
my Shimano Exage chainset?

Quoted message said:

What do I need to specify to ensure I get the correct one?

Quoted message said:

(There's so many combinations of sizes etc shops don't stock them all).

Quoted message said:

Birmingham

You should pay about £26 for one if you go with TA, I think they make
one to suit.
--

Buck

I would rather be out on my Catrike

http://www.catrike.co.uk

MSeries said:

John Pitcock (nospam) said:

Where is a good place to buy a replacement 36 tooth middle chainring for my
Shimano Exage chainset?

What do I need to specify to ensure I get the correct one?

(There's so many combinations of sizes etc shops don't stock them all).

Birmingham

You need to knwo the PCD or BCD (samae thing) its the distance of the
circle that the bolt holes lie on. Might be 110mm, might be more or
less (my 1986 Deore is 74 and 110mm). Count the number of bolts or arms
too. Then contact somewhere like Settle Cycles or Spa Cycles they have
loads of these. I just got a 48T for my old Deore chainset from Settle
for £15.

Sound advice if you're dealing with middle to highend stuff which Exage
isn't. In the bottom of the range Shimano cranksets you have to be very
weary of stamped chainwheels with offset, chainwheels which mount to the
other chainring and rivited constructions. With those it is often
cheaper to replace the crankset.

I don't know if there was a proper Exage triple, but it could be one
borrowed from RSX. The typedesignation (FC-?????) on the back of the
crank should help)
--
---
Marten Gerritsen

INFOapestaartjeM-GINEERINGpuntNL
www.m-gineering.nl

Quoted message said:

Sound advice if you're dealing with middle to highend stuff which Exage
isn't. In the bottom of the range Shimano cranksets you have to be very
weary of stamped chainwheels with offset, chainwheels which mount to the
other chainring and rivited constructions. With those it is often
cheaper to replace the crankset.

I don't know if there was a proper Exage triple, but it could be one
borrowed from RSX. The typedesignation (FC-?????) on the back of the
crank should help)

My Exage triple had rings which were bolt mounted directly onto the
crank and seemed reasonable quality. However, 'tis probably better
value for money to replace the whole lot. 25 quid gets you one of
these:

<URL:http://www.wiggle.co.uk/ProductDetail.aspx?W=0&Cat=cycle&UberCat=0&ProdID=5300006470>

Buck said:

You should pay about £26 for one if you go with TA, I think they make
one to suit.

And rather nice they are too.