Cycling Equipment · Public discussion

Fixed Gear Chainline - One Piece Crank - The Saga Continues

Started by Protag Hiro · · Last activity · 6 posts · 997 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
5 July 2005
Last activity
6 July 2005
Original author
Protag Hiro
Posts
6
Discussion status
Public discussion
Total views
997
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. So here's the deal. I have a 1970 Schwinn Suburban that I fixed up.
    Surly hub, Dura Ace Cog, Wald Chainring, all 1/8". I am using the
    original one piece crank, so chainline adjustment up there is not
    happening.

    I took my bike into a LBS, and asked them to space the rear hub and
    redish the wheel to get my chainline right. They called me up, said the
    bike was done, and I took it home.

    The chain noise that caused me to take the wheel to them in the first
    place is still there. I placed a straight edge against the chainring,
    checked the chainline, and it is still quite a ways off. Am I going to
    have to live with this?

    It seems to me that one of the spacers on the left side of the hub
    could have been moved over to the right to address this problem. Should
    they be able to get it close to perfect? Because as it is, it is far
    from perfect. I know that with a better crank/bb setup, this could be
    fine tuned much easier.

    Does anyone out there have a one piece crank on an old Schwinn fixie?
    How straight can I really expect to get this chainline? Should I take
    it back to the shop and have them re-do it? Arg!!! I can live with the
    chain noise if there is nothing I can do about it, but if it is
    possible to get it better, I want it done!

  2. A fellow Neal Stephenson fan said:

    So here's the deal. I have a 1970 Schwinn Suburban that I fixed up.
    Surly hub, Dura Ace Cog, Wald Chainring, all 1/8". I am using the
    original one piece crank, so chainline adjustment up there is not
    happening.

    I took my bike into a LBS, and asked them to space the rear hub and
    redish the wheel to get my chainline right. They called me up, said the
    bike was done, and I took it home.

    The chain noise that caused me to take the wheel to them in the first
    place is still there. I placed a straight edge against the chainring,
    checked the chainline, and it is still quite a ways off. Am I going to
    have to live with this?

    Not a good idea.

    Quoted message said:

    It seems to me that one of the spacers on the left side of the hub
    could have been moved over to the right to address this problem.

    Usually, in converting a multi-freewheel-type wheel, you need to move
    spacers from the right to the left.

    Quoted message said:

    Should they be able to get it close to perfect?

    Definitely.

    Quoted message said:

    Because as it is, it is far
    from perfect. I know that with a better crank/bb setup, this could be
    fine tuned much easier.

    No, your bike probably has pretty standard chainline, likely about 41 mm.

    You should measure it. See: http://sheldonbrown.com/chainline

    Might also want to check to make sure the frame is straight.

    See; http://sheldonbrown.com/frame-spacing

    Quoted message said:

    How straight can I really expect to get this chainline?

    Plus or minus a millimeter.

    Quoted message said:

    Should I take it back to the shop and have them re-do it?

    Absolutely.

    Sheldon "Straight Ahead" Brown
    +-----------------------------------------------------+
    | Hanlon's Razor: "Never attribute to malice |
    | that which is adequately explained by stupidity." |
    +-----------------------------------------------------+
    Harris Cyclery, West Newton, Massachusetts
    Phone 617-244-9772 FAX 617-244-1041
    http://harriscyclery.com
    Hard-to-find parts shipped Worldwide
    http://captainbike.com http://sheldonbrown.com


  3. Quoted message said:
    Quoted message said:

    How straight can I really expect to get this chainline?

    Plus or minus a millimeter.

    Quoted message said:

    Should I take it back to the shop and have them re-do it?

    Absolutely.

    Sheldon "Straight Ahead" Brown

    So I took it back in this morning. The frame was a bit off, and one of
    the spacers was on the wrong side. They centered me up, redished the
    wheel, and charged me 10 more bucks for the 'quickie frame adjustment'
    which consisted of banging on the bike with a rubber mallet. Now the
    chainline is much better, and since I watched them do it this time, I
    know what to look for in the future.

    Protag "My last name is also Brown, really" Hiro

  4. Protag Hiro said:


    So I took it back in this morning. The frame was a bit off, and one of
    the spacers was on the wrong side. They centered me up, redished the
    wheel, and charged me 10 more bucks for the 'quickie frame adjustment'
    which consisted of banging on the bike with a rubber mallet. Now the
    chainline is much better, and since I watched them do it this time, I
    know what to look for in the future.

    In another week or so, when you've had all the fixie action you can
    stand, you'll know just how to correct the chainline for your new
    single-speed freewheel.

    Perhaps you will think, like I did, "Wow, riding downhill is fun again!
    And I can scratch myself, or stretch, or adjust my position on the
    saddle or pedals without getting kicked off my bike!"

    Chalo Colina

  5. ha ha fa fa he he ho ho. very funny. i still have my good old mountain
    bike for the days when i want to coast. i havent been as physically
    tired after a ride since the first few weeks i started cycling in 1996.
    i am really diggin the fixed life. ive seen you round seattle chalo,
    you gotta see this big brown beast i am riding!

  6. Protag Hiro said:


    i am really diggin the fixed life. ive seen you round seattle chalo,
    you gotta see this big brown beast i am riding!

    I'm looking forward to it.

    You know, I do have one "fixed gear" contraption left in my menagerie--
    my titan-sized Big Wheel. Come to the Dead Baby Bikes 9th annual
    downhill race on August 5th and try it out.

    http://deadbabybikes.org/raceshit/racenow.htm

    Chalo Colina

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.