I had to repace my front forks, I got some new carbon ones from wiggle and a carbon steerer bung.
Now left from when I look apart my old forks were the following components:
2 1/4inch rings (spacers that went beneith the handle bar barrel clamp)
2 rings that run round the barings in the frame
a plastic bung thing that i had to pry out which held the top baring ring thing in. and a little plastic cover.
So i tryed to put it all back together, so from the bottom up the baring ring, then the frame then the top baring ring, bung shoved down that as best I could, then the 2 rings then the handle bars, now I know that there is more to it than that, I just don't know what!?!?!
There is a bit of horizontal movement from the steerer.
I'd never done it before, and I was being stupid thinking I could just bang it all back together, help would be much appreciated.
If picture would help a LOT, I can get them.