Cycling Equipment · Public discussion

Bogus frame flex "test?"

Started by Jhas · · Last activity · 43 posts · 1,376 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
30 March 2005
Last activity
4 April 2005
Original author
Jhas
Posts
43
Discussion status
Public discussion
Total views
1,376
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–20 of 43
Posts remain in their original chronological order.

Text size
  1. I know the subject of frame flex has been discussed ad infinitum in
    this group, but I wanted to throw out this recent observation. On a
    recent visit to a LBS, the owner took great pains to demonstrate for me
    how flexible my current ride is by - you guessed it - squeezing the
    brake and then pressing on the pedal. Low and behold, the BB appeared
    to deflect sideways quite a ways. Here's the thing, though. When I
    actually RIDE the bike, I never get any front der. rub, even on the
    hardest out-of-saddle climbs with the der. trimmed close to the chain,
    and I've never had any unintended rear der. shifts or hihg-speed
    shimmy either. In short, this frame works perfectly for me (plus,
    unlike the new frame the LBS guy wanted to sell me, this one is bought
    and paid for!). So my question is, what's actually flexing during
    the frame flex "test" described above? I suspect it's mostly the
    tires.

    Regards to all . . .

  2. Jhas said:

    I know the subject of frame flex has been discussed ad infinitum in
    this group, but I wanted to throw out this recent observation. On a
    recent visit to a LBS, the owner took great pains to demonstrate for me
    how flexible my current ride is by - you guessed it - squeezing the
    brake and then pressing on the pedal. Low and behold, the BB appeared
    to deflect sideways quite a ways. Here's the thing, though. When I
    actually RIDE the bike, I never get any front der. rub, even on the
    hardest out-of-saddle climbs with the der. trimmed close to the chain,
    and I've never had any unintended rear der. shifts or hihg-speed
    shimmy either. In short, this frame works perfectly for me (plus,
    unlike the new frame the LBS guy wanted to sell me, this one is bought
    and paid for!). So my question is, what's actually flexing during
    the frame flex "test" described above? I suspect it's mostly the
    tires.

    They all do that - even my fat-tubed Cannondale MTB. The rear wheel and
    the frame are flexing all right, but you get most of the energy back on
    the return pedal stroke (frame metals are pretty good as springs).

    On the other hand, if you're getting brake and/or gear rub, then your
    frame *is* too flexible.

  3. Jhas said:

    I know the subject of frame flex has been discussed ad infinitum in
    this group, but I wanted to throw out this recent observation. On a
    recent visit to a LBS, the owner took great pains to demonstrate for me
    how flexible my current ride is by - you guessed it - squeezing the
    brake and then pressing on the pedal. Low and behold, the BB appeared
    to deflect sideways quite a ways. Here's the thing, though. When I
    actually RIDE the bike, I never get any front der. rub, even on the
    hardest out-of-saddle climbs with the der. trimmed close to the chain,
    and I've never had any unintended rear der. shifts or hihg-speed
    shimmy either. In short, this frame works perfectly for me (plus,
    unlike the new frame the LBS guy wanted to sell me, this one is bought
    and paid for!). So my question is, what's actually flexing during
    the frame flex "test" described above? I suspect it's mostly the
    tires.

    They all do that - even my fat-tubed Cannondale MTB. The rear wheel and
    the frame are flexing all right, but you get most of the energy back on
    the return pedal stroke (frame metals are pretty good as springs).

    On the other hand, if you're getting brake and/or gear rub, then your
    frame *is* too flexible.

  4. Jhas said:

    I know the subject of frame flex has been discussed ad infinitum in
    this group, but I wanted to throw out this recent observation. On a
    recent visit to a LBS, the owner took great pains to demonstrate for
    me how flexible my current ride is by - you guessed it - squeezing the
    brake and then pressing on the pedal. Low and behold, the BB appeared
    to deflect sideways quite a ways. Here's the thing, though. When I
    actually RIDE the bike, I never get any front der. rub, even on the
    hardest out-of-saddle climbs with the der. trimmed close to the chain,
    and I've never had any unintended rear der. shifts or hihg-speed
    shimmy either. In short, this frame works perfectly for me (plus,
    unlike the new frame the LBS guy wanted to sell me, this one is bought
    and paid for!). So my question is, what's actually flexing during
    the frame flex "test" described above? I suspect it's mostly the
    tires.

    Regards to all . . .

    Yer right, mostly tires and wheels with probably a teensy-tinsy little bit
    of frame and crank flex. Most frame flex you don't feel while riding because
    the bike moves slightly sideways, with the tires and wheels absorbing most
    of that energy.

    That 'standing-on-the-pedal-with-the-brake-on' trick is an old one that's
    misused and misunderstood. Your LBS may be well-intentioned (or not). Did he
    do the same "test" on the bike he proposed selling you? I would suspect it
    would do exactly the same thing as yours.

  5. Jhas said:

    I know the subject of frame flex has been discussed ad infinitum in
    this group, but I wanted to throw out this recent observation. On a
    recent visit to a LBS, the owner took great pains to demonstrate for
    me how flexible my current ride is by - you guessed it - squeezing the
    brake and then pressing on the pedal. Low and behold, the BB appeared
    to deflect sideways quite a ways. Here's the thing, though. When I
    actually RIDE the bike, I never get any front der. rub, even on the
    hardest out-of-saddle climbs with the der. trimmed close to the chain,
    and I've never had any unintended rear der. shifts or hihg-speed
    shimmy either. In short, this frame works perfectly for me (plus,
    unlike the new frame the LBS guy wanted to sell me, this one is bought
    and paid for!). So my question is, what's actually flexing during
    the frame flex "test" described above? I suspect it's mostly the
    tires.

    Regards to all . . .

    Yer right, mostly tires and wheels with probably a teensy-tinsy little bit
    of frame and crank flex. Most frame flex you don't feel while riding because
    the bike moves slightly sideways, with the tires and wheels absorbing most
    of that energy.

    That 'standing-on-the-pedal-with-the-brake-on' trick is an old one that's
    misused and misunderstood. Your LBS may be well-intentioned (or not). Did he
    do the same "test" on the bike he proposed selling you? I would suspect it
    would do exactly the same thing as yours.

  6. Well, this particular LBS tends to want to upsell everybody to high
    zoot brands. My frame does flex somewhat more than most in the
    "standing-on-the-pedal" trick, but it works great for riding.

  7. Well, this particular LBS tends to want to upsell everybody to high
    zoot brands. My frame does flex somewhat more than most in the
    "standing-on-the-pedal" trick, but it works great for riding.

  8. Jhas said:

    Well, this particular LBS tends to want to upsell everybody to high
    zoot brands. My frame does flex somewhat more than most in the
    "standing-on-the-pedal" trick, but it works great for riding.


    If you're happy with what you have, ride on!

  9. Jhas said:

    Well, this particular LBS tends to want to upsell everybody to high
    zoot brands. My frame does flex somewhat more than most in the
    "standing-on-the-pedal" trick, but it works great for riding.


    If you're happy with what you have, ride on!

  10. Zog The Undeniable said:


    They all do that - even my fat-tubed Cannondale MTB. The rear wheel and
    the frame are flexing all right, but you get most of the energy back on
    the return pedal stroke (frame metals are pretty good as springs).

    How do you think you get that energy "back"? Unless that spring return
    actually contributes to pushing down the other pedal, which it doesn't,
    there is no way you recover that energy expended in flexing the frame.
    You also get the energy back when you squeeze one of those hand-exerciser
    things, then release it, but you still get tired from doing it.

    --

    David L. Johnson

    __o | When you are up to your ass in alligators, it's hard to remember
    _`\(,_ | that your initial objective was to drain the swamp. -- LBJ
    (_)/ (_) |

  11. Zog The Undeniable said:


    They all do that - even my fat-tubed Cannondale MTB. The rear wheel and
    the frame are flexing all right, but you get most of the energy back on
    the return pedal stroke (frame metals are pretty good as springs).

    How do you think you get that energy "back"? Unless that spring return
    actually contributes to pushing down the other pedal, which it doesn't,
    there is no way you recover that energy expended in flexing the frame.
    You also get the energy back when you squeeze one of those hand-exerciser
    things, then release it, but you still get tired from doing it.

    --

    David L. Johnson

    __o | When you are up to your ass in alligators, it's hard to remember
    _`\(,_ | that your initial objective was to drain the swamp. -- LBJ
    (_)/ (_) |

  12. Jhas said:

    I know the subject of frame flex has been discussed ad infinitum in
    this group, but I wanted to throw out this recent observation. On a
    recent visit to a LBS, the owner took great pains to demonstrate for


    me

    Quoted message said:

    how flexible my current ride is by - you guessed it - squeezing the
    brake and then pressing on the pedal. Low and behold, the BB


    appeared

    Quoted message said:

    to deflect sideways quite a ways. Here's the thing, though. When I
    actually RIDE the bike, I never get any front der. rub, even on the
    hardest out-of-saddle climbs with the der. trimmed close to the


    chain,

    Quoted message said:

    and I've never had any unintended rear der. shifts or hihg-speed
    shimmy either. In short, this frame works perfectly for me (plus,
    unlike the new frame the LBS guy wanted to sell me, this one is


    bought

    Quoted message said:

    and paid for!). So my question is, what's actually flexing during
    the frame flex "test" described above? I suspect it's mostly the
    tires.

    There may be some frame flex, but so what? Lateral stiffness is mostly
    a matter of personal preference. As for performance, there's no
    significant difference, races have been won with either extreme. I've
    ridden both kinds and prefer a stiff frame, but that's just me.

  13. Jhas said:

    I know the subject of frame flex has been discussed ad infinitum in
    this group, but I wanted to throw out this recent observation. On a
    recent visit to a LBS, the owner took great pains to demonstrate for


    me

    Quoted message said:

    how flexible my current ride is by - you guessed it - squeezing the
    brake and then pressing on the pedal. Low and behold, the BB


    appeared

    Quoted message said:

    to deflect sideways quite a ways. Here's the thing, though. When I
    actually RIDE the bike, I never get any front der. rub, even on the
    hardest out-of-saddle climbs with the der. trimmed close to the


    chain,

    Quoted message said:

    and I've never had any unintended rear der. shifts or hihg-speed
    shimmy either. In short, this frame works perfectly for me (plus,
    unlike the new frame the LBS guy wanted to sell me, this one is


    bought

    Quoted message said:

    and paid for!). So my question is, what's actually flexing during
    the frame flex "test" described above? I suspect it's mostly the
    tires.

    There may be some frame flex, but so what? Lateral stiffness is mostly
    a matter of personal preference. As for performance, there's no
    significant difference, races have been won with either extreme. I've
    ridden both kinds and prefer a stiff frame, but that's just me.

  14. Scott Ehardt said:

    The question is, where does the stored energy go?

    Heat.

    Quoted message said:

    Does it go into the
    motion of the bike?

    Only if you can see how that sideways push back is used by your body to
    push the other pedal down. It looks to me to be totally wasted motion.

    Quoted message said:

    However, if you pull it quickly and then stop moving your hand (but
    don't reverse), the rubber band will continue to exert a force on the
    book until it is no longer stretched.

    But in this case the release of the spring directly translates to moving
    the book. Hold the pedals of a bike still, push the bottom bracket to one
    side. Does the bike move forward? How?

    --

    David L. Johnson

    __o | What is objectionable, and what is dangerous about extremists is
    _`\(,_ | not that they are extreme, but that they are intolerant.
    (_)/ (_) | --Robert F. Kennedy

  15. Scott Ehardt said:

    The question is, where does the stored energy go?

    Heat.

    Quoted message said:

    Does it go into the
    motion of the bike?

    Only if you can see how that sideways push back is used by your body to
    push the other pedal down. It looks to me to be totally wasted motion.

    Quoted message said:

    However, if you pull it quickly and then stop moving your hand (but
    don't reverse), the rubber band will continue to exert a force on the
    book until it is no longer stretched.

    But in this case the release of the spring directly translates to moving
    the book. Hold the pedals of a bike still, push the bottom bracket to one
    side. Does the bike move forward? How?

    --

    David L. Johnson

    __o | What is objectionable, and what is dangerous about extremists is
    _`\(,_ | not that they are extreme, but that they are intolerant.
    (_)/ (_) | --Robert F. Kennedy

  16. can one seperate frame flex and wheel flex and tire flex?
    goes on all the time! the frame flexes when i ride over the train
    tracks at 85 mph
    ok but the wheels...?
    expert expert!!

  17. can one seperate frame flex and wheel flex and tire flex?
    goes on all the time! the frame flexes when i ride over the train
    tracks at 85 mph
    ok but the wheels...?
    expert expert!!

  18. "David L. Johnson" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:
    Scott Ehardt said:

    The question is, where does the stored energy go?

    Heat.

    Yes, some is lost to heat. However, the amount is minimal. Consider two
    actions with similar hand motions:

    Stirring cake batter - all your effort goes to heat (the batter will not
    "un-stir" itself)

    Turning a hand crank to lift a bucket out of a well - in this case some
    energy is lost to heat, but most is used to increase the potential energy of
    the bucket. This energy could be re-captured when the handle is released
    (it will "un-lift" itself.)

    Quoted message said:
    Quoted message said:

    Does it go into the
    motion of the bike?

    Only if you can see how that sideways push back is used by your body to
    push the other pedal down. It looks to me to be totally wasted motion.

    Quoted message said:

    However, if you pull it quickly and then stop moving your hand (but
    don't reverse), the rubber band will continue to exert a force on the
    book until it is no longer stretched.

    But in this case the release of the spring directly translates to moving
    the book. Hold the pedals of a bike still, push the bottom bracket to one
    side. Does the bike move forward? How?

    The bending of the frame is caused by pushing on the pedal (an action which
    we agree makes the bike go). Therefore as the power stroke is completed
    (and weight on the pedal reduces), the frame would still be pushing the
    pedal "up" (towards the foot) and (like the stretched rubber band),
    contributing to the forward motion of the bike.

    --
    Scott Ehardt
    http://www.scehardt.com

  19. "David L. Johnson" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:
    Scott Ehardt said:

    The question is, where does the stored energy go?

    Heat.

    Yes, some is lost to heat. However, the amount is minimal. Consider two
    actions with similar hand motions:

    Stirring cake batter - all your effort goes to heat (the batter will not
    "un-stir" itself)

    Turning a hand crank to lift a bucket out of a well - in this case some
    energy is lost to heat, but most is used to increase the potential energy of
    the bucket. This energy could be re-captured when the handle is released
    (it will "un-lift" itself.)

    Quoted message said:
    Quoted message said:

    Does it go into the
    motion of the bike?

    Only if you can see how that sideways push back is used by your body to
    push the other pedal down. It looks to me to be totally wasted motion.

    Quoted message said:

    However, if you pull it quickly and then stop moving your hand (but
    don't reverse), the rubber band will continue to exert a force on the
    book until it is no longer stretched.

    But in this case the release of the spring directly translates to moving
    the book. Hold the pedals of a bike still, push the bottom bracket to one
    side. Does the bike move forward? How?

    The bending of the frame is caused by pushing on the pedal (an action which
    we agree makes the bike go). Therefore as the power stroke is completed
    (and weight on the pedal reduces), the frame would still be pushing the
    pedal "up" (towards the foot) and (like the stretched rubber band),
    contributing to the forward motion of the bike.

    --
    Scott Ehardt
    http://www.scehardt.com

  20. Scott Ehardt said:

    The bending of the frame is caused by pushing on the pedal (an action which
    we agree makes the bike go). Therefore as the power stroke is completed
    (and weight on the pedal reduces), the frame would still be pushing the
    pedal "up" (towards the foot) and (like the stretched rubber band),
    contributing to the forward motion of the bike.

    No. When the power stroke is completed, the relevant pedal is nearing
    bottom. In order to contribute to making the bike move forward, the
    restoring force of the spring would have to push the pedal back. It
    pushes the pedal sideways.

    --

    David L. Johnson

    __o | As far as the laws of mathematics refer to reality, they are not
    _`\(,_ | certain, and as far as they are certain, they do not refer to
    (_)/ (_) | reality. -- Albert Einstein

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.