Cycling Equipment ยท Public discussion

can carbon fibre be repaired?

Started by ALAN OBRIEN ยท ยท Last activity ยท 20 posts ยท 2,729 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
22 March 2005
Last activity
28 March 2005
Original author
ALAN OBRIEN
Posts
20
Discussion status
Public discussion
Total views
2,729
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1โ€“20 of 20
Posts remain in their original chronological order.

Text size
  1. ๐Ÿ˜• hi guys,
    iwas cleaning down my bike yesterday when i noticed a small crack in the carbon just above the right rear dropout.
    my question is, 1. can it be repaired?
    2.if so, do i have to send it back to manufacturer?
    3. is there anywhere in ireland that might be able to help, if i
    dont have to send it back to manufacturer?
    sorry, should have mentioned earlier its a colnago active.
    thanks in advance for all your help,
    alan. ๐Ÿ˜•

  2. Hi Alan,
    1. Yes
    2. No question the preferred route...what I would do.
    3. Not familiar with frame builders in Ireland but would trust the manufacturer
    the most.
    Nice bike BTW and good luck,
    George

  3. What looks like a crack in the fibre is often a harmless crack in the clear coat... maybe a trip to your LBS is in order?

  4. biker7 said:

    Hi Alan,
    Not familiar with frame builders in Ireland...


    Come on George you know colnago's aren't built in ireland...I know you do.

  5. RC2 said:

    Come on George you know colnago's aren't built in ireland...I know you do.


    Rc2, Alan asked for an Irish reference because he's looking for a (presumably) local place to get his frame looked at.

  6. lokstah said:

    Rc2, Alan asked for an Irish reference because he's looking for a (presumably) local place to get his frame looked at.

    I knew it. Neurons a little slow today...

  7. hey RC, isn't a board consensus that the best frames are made in Taiwan?
    ๐Ÿ˜‰
    George

  8. If we can just find Alan a Taiwanese-run frame house in Ireland...

  9. how bout a Taiwanese bath house with Irish women with that beautiful white skin ๐Ÿ˜Ž
    George

  10. :p just slap a little J-B Weld on it and go riding.Then put a band-aid on it for a good conversation starter on your next group ride. Let us know how it works out.

  11. RC2 said:

    What looks like a crack in the fibre is often a harmless crack in the clear coat... maybe a trip to your LBS is in order?

    just had another look at the bike, definitly a crack. actually coming close to being a chunk of carbon about 5mm x 5mm starting to come away from the frame. as you guys can imagine im a tad [censored] about this, i guess im going to have to send the frame back. anyone know how long colnago guarantees their frames for? i was told, when i received the frame but i just cant remember. ๐Ÿ™ ๐Ÿ™

  12. I would fill that crack with epoxy, thats what the carbon fibers are reinforced with when they are manufactured. You'll be fine with epoxy because it will contain the broken fibers... you don't want sheets of carbon fibers to start to peel away, because as soon as they do, the part/tube will catastrophically fail.

  13. keanu122 said:

    I would fill that crack with epoxy, thats what the carbon fibers are reinforced with when they are manufactured. You'll be fine with epoxy because it will contain the broken fibers... you don't want sheets of carbon fibers to start to peel away, because as soon as they do, the part/tube will catastrophically fail.

    If I knew Colnago wasn't going to do anything (if it was obvious that my 3-yr wacked the stay with a golf club for instance) I would do this. Problem w/epoxy is that it doesn't do very well in torsion. It might protect the fibers but that's about it. With the crack adjacent to the dropout I'd see if Colnago will do anything, not familiar with their warranty.

  14. ๐Ÿ™„ All kidding aside,don't try to repair it until you contact Colnago. Once you mess with it they can't see the original damage. I hope you have proof of purchase because they do not like doing warranty if they think you bought it from e-bay real cheap and then trying to scam them. I would go to their web site and contact them. Please let us know what their warranty is and how they handle this situation. That way the rest of us will know the way they treat their customers and if we should stay away from their frames.

  15. keanu122 said:

    I would fill that crack with epoxy, thats what the carbon fibers are reinforced with when they are manufactured. You'll be fine with epoxy because it will contain the broken fibers... you don't want sheets of carbon fibers to start to peel away, because as soon as they do, the part/tube will catastrophically fail.

    That is just dumbassery if one has warranty,and could just be covering up a potentially bigger problem,that could result in injury or death.

  16. is that how you got disfigured Barge-troll :eek:...you had a cracked Colnago?
    Does sound like a personal problem.
    George

  17. biker7 said:

    is that how you got disfigured Barge-troll :eek:...you had a cracked Colnago?
    Does sound like a personal problem.
    George

    Your complimentary FOOL hat is in the mail. ๐Ÿ™„

  18. boudreaux said:

    Your complimentary FOOL hat is in the mail. ๐Ÿ™„

    It's called a dunce hat. ๐Ÿ˜‰

  19. biker7 said:

    is that how you got disfigured Barge-troll :eek:...you had a cracked Colnago?
    Does sound like a personal problem.
    George

    Give it a rest lad....every thread lately seems to have something like this in it from you.

  20. biker7 said:

    how bout a Taiwanese bath house with Irish women with that beautiful white skin ๐Ÿ˜Ž
    George


    Now you dude are "a man with a plan!"

Active in the last 60 minutes

Active in this thread

0 users ยท 0 guests ยท0 bots ยท0 total

No signed-in users are active right now.

No known search crawlers active right now.