kickstands?

M. Chandler said:

Looking for kickstand recommendations for a 2001 RANS Stratus.

--
Mark Chandler
Superior, CO
http://www.MileHighSkates.com

Greenfield makes a rear mount kickstand which works on the Stratus. It
clamps to the rear stays.

Zach Kaplan

Zach said:

M. Chandler said:

Looking for kickstand recommendations for a 2001 RANS Stratus.

--
Mark Chandler
Superior, CO
http://www.MileHighSkates.com

Greenfield makes a rear mount kickstand which works on the Stratus. It
clamps to the rear stays.

Didn't the Greenfield kickstands come as standard equipment on most RANS
bikes except for the low end (Rocket, Tailwind and Wave) and the Screamer?

--
Tom Sherman - Earth

I recently bought a Greenfield kickstand for my EX-Sport. It works
great..my only problem is i find its almost too uprightas though it
were going to fall over the other side.

Slugger said:

I recently bought a Greenfield kickstand for my EX-Sport. It works
great..my only problem is i find its almost too uprightas though it
were going to fall over the other side.

Take the foot off, cut off a small section of the leg with a hacksaw or
Dremel tool cutting wheel, and put the foot back on. The two
Greenfield's I have include cast "score" marks for this purpose.

--
Tom Sherman - Earth (Downstate Illinois, North of Forgottonia)

On Mon, 28 Mar 2005 03:48:52 -0600, Tom Sherman
<[email hidden]> wrote in message
<[email hidden]>:

Quoted message said:

Take the foot off, cut off a small section of the leg with a hacksaw or
Dremel tool cutting wheel, and put the foot back on.

Just as well you left the original quoted text in there, being in the
middle of reading Miracle on the River Kwai, that read somewhat, er,
interestingly!

Guy
--
May contain traces of irony. Contents liable to settle after posting.
http://www.chapmancentral.co.uk

85% of helmet statistics are made up, 69% of them at CHS, Puget Sound

In article <[email hidden]>, Tom Sherman

Quoted message said:

Slugger said:

I recently bought a Greenfield kickstand for my EZ-Sport. It works
great..my only problem is i find its almost too uprightas though it
were going to fall over the other side.

Take the foot off, cut off a small section of the leg with a hacksaw or
Dremel tool cutting wheel, and put the foot back on. The two
Greenfield's I have include cast "score" marks for this purpose.

Ahhh thanks Tom. I'll bring it down to the bike shop and let them hack
away on it.