Nick Williamson said:This is a problem that's got worse over the past few weeks and I don't know what to adjust: is it
a case of pulling more cable through the V-brake assembly and re-tightening the screw, or would
the adjustment be made to the brake lever itself?
Most Vs can be adjusted by tensioning the cable at the brake lever assembly, by screwing the
adjuster out (i.e., you lengthen the cable run path by the same amount as the block wear).
Ultimately, however, you run out of adjustment this way, at which point pulling a little more
through where the cable is clamped to the brake assembly may well be called for. If you do this,
make a point of resetting the adjustment screw at the lever first, so giving you more to play with
back at that end in future.
As I've found out the hard way (i.e., by getting it wrong) there can be a bit more to V adjustment
than just clearance. The pad mounts can be independently angled thanks to the ball/cup
thingummies[1] on the spacers, and the spacers themselves usually have a choice of thick and thin
for each side of the mounting slot so you can choose the best according to the rim/mount clearance.
Make sure that when the brake is pulled tight the pads are coming up pretty well square (relative to
the plane of the worn pad surface) against the rim, and if they're not then fiddle with the
aforementioned until they do. As I found out, this can make the difference between brakes that work
and brakes that bottom out against the handlebars.
Some Vs have further adjustment possibilities given by independent screws that change the relative
clearance of L and R pads (a wee grub screw on the mech by the pad mount, one each side). You only
need to worry about this if one side is closer in than the other.
Quoted message said:Sorry for asking such a newbie question!
There are lots of people with V brakes who have only a dim awareness that they even *can* be
adjusted, so no need to apologise!
Pete.
[1] a technical term, obviously...
--
Peter Clinch University of Dundee Tel 44 1382 660111 ext. 33637 Medical Physics, Ninewells Hospital
Fax 44 1382 640177 Dundee DD1 9SY Scotland UK net [email hidden]
dundee.ac.uk~pjclinchOpen ↗
