I am about to try and replace my gear cables. Never done the outers before.
I have bought a set of Clark Teflon. They contain small O rings. Where
do these go? Cannot see them on my current set.
--
Remove norubbish to reply direct
Jack Russell
Australia and New Zealand · Public discussion
Replacing gear cables
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Australia and New Zealand
- Published
- 18 January 2005
- Last activity
- 18 January 2005
- Original author
- Jack Russell
- Posts
- 2
- Discussion status
- Public discussion
- Total views
- 467
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Jack Russell said:
I am about to try and replace my gear cables. Never done the outers before.
I have bought a set of Clark Teflon. They contain small O rings. Where
do these go? Cannot see them on my current set.
--
Remove norubbish to reply directJack Russell
Are they in groups of 3? They could be anti-cable-slap 'donuts'. Not mandatory, but if you want to, put them halfway down/along the cable to stop the cable rubbing/slapping on the duco. If not, and they fit precisely into the ferrule I.D., then thread them over the inner cable before you put the ferrule on the outer cable. Stops crud getting into your cable, you see.M"rubber rings: small ones have no anal connotations" H
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.