cassettes and replacing them

In article <[email hidden]>, "Chris Strug"

Quoted message said:

The bike itself is still pretty sound. I've cleaned it, lubed it and put a new chain on. However,
the gears are rather "jumpy". I've noticed that as soon as I put any power down it "slips". Now I
*think* that this is due to the cassette being old and worn.

Yes, almost certainly. Chain slippage after you replace the old chain is a classic symptom of
worn cogs.

Quoted message said:

Now assuming that I need a new cassette:

1. can I just buy a new Shimano HG50 / 70 cassette and slap it on?

Yes. Pleas match the speeds

Quoted message said:

2. Is it a fiddle to fit it? I.e. does it a require a degree of precision / know-how to fit it and
get a smooth transmission / gear change? I don't want to waste thirty quid on one only to wreck
it fitting it. I actually have the tool and would like ot do it myself if possible.

No. It's trivial. You pull the wheel, remove the skewer, put the chain whip on the second-largest
cog, and the tool on the lock ring. Unscrew and remove lock ring, slide all the gears straight off,
clean and grease the splines (because you're being conscientious), and slide the new cassette on.

Quoted message said:

I'm not completely sure what manufacturer / model the cassette actually is, however, the rear hub
is an STX-RC.

Sounds like you're dealing with a Shimano 8v freehub, though it may be 7 or 9 speeds. You can
usually identify the exact cassette you have by counting the gears and the teeth in the top and
bottom cogs, though there may be more than one that meets the spec. Within reason, going several
teeth either way won't affect your drivetrain.

Quoted message said:

Thanks in advance for any help assistance and apologies if this isn't suitable for this NG
(although in my defence the FAQ doesn't say anything against it!).

--
Ryan Cousineau, [email hidden] sfu.ca~rcousineOpen ↗ President, Fabrizio Mazzoleni Fan Club

"Chris Strug" <[email hidden]> schrieb im Newsbeitrag
"]news:[email hidden]...

Quoted message said:

Hello,

Now assuming that I need a new cassette:

I agree with Ryan on this one. It is a classic symptom. Usually it comes in after changing a chain.
Slippage can aslo happen on a new chain/casette combo. You might want to try adjusting your rear
deraileuer first.

Quoted message said:

1. can I just buy a new Shimano HG50 / 70 cassette and slap it on?

2. Is it a fiddle to fit it? I.e. does it a require a degree of precision

/

Quoted message said:

know-how to fit it and get a smooth transmission / gear change? I don't

want

Quoted message said:

to waste thirty quid on one only to wreck it fitting it. I actually have

the

Quoted message said:

tool and would like ot do it myself if possible.

Slip the socket into the splines

Unscrew

Pull out old cassette

Put new one on (there is a key spline that is larger than the rest)

Tighten down with the socket.

It is about on par with changing the oil on your car.

Quoted message said:

I'm not completely sure what manufacturer / model the cassette actually

is,

Quoted message said:

however, the rear hub is an STX-RC.

How old is it? I have a five-year-old bike with an STX rear hub. It does not have a cassette, but a
freewheel. Hubs come in two types, the obsolete freewheel type and the newer freehub type. A
cassette is just a stack of cogs that goes onto a freehub. A freewheel threads onto the hub and
contains all of the ratcheting mechanisms within.

Yours truly went out and bought a new 7-speed cassette for that hub thinking (actually not
thinking) is was a freehub. Only after the cassette removal tool did not QUITE fit right did I do
my homework. Doh!

Here is a good reference:

sheldonbrown.comfree k7.htmlOpen ↗

-Dave

Ryan, Dave

Cheers for the advice. I'll have a pop and let you know how I get on.

Oh, one last question, I take it when it says things like "11-34" re - a cassette its referring to
the number of teeth on the inner and outer cogs?

Thanks again

Chris.

While you got everything apart,check the freehub for play.

Fire up MTB 03

"Chris Strug" <[email hidden]> schrieb im Newsbeitrag
"]news:[email hidden]...

Quoted message said:

Ryan, Dave

Cheers for the advice. I'll have a pop and let you know how I get on.

Oh, one last question, I take it when it says things like "11-34" re - a cassette its referring to
the number of teeth on the inner and outer cogs?

Exactly.

Cheers, -Dave

Chris Strug said:

Hello,

[snip good question]

Chris, you probably need to replace the chain, rear cassette, and possible the front chain ring(s).

Support your LBS, stop by and have them check it out. If you're a do-it-your-selfer go to the
library or bookstore...tons of good material to be found.

Peace, Bill The mind serves properly as a window glass rather than as a reflector, that is, the mind
should give an immediate view instead of an interpretation of the world.
:-]