Here's my take on the seat heigth issue:
1. For freestyle tricks and general riding, higher the better (within
reason). WWing, gliding, 1 foot riding, et al, on a MUni is much harder
(than on a freestyle uni) because the uni crown--and tire--is so high,
and when you're that crunched up both the movement and the balance are
harder.
2. For technical downhill MUniing, a low seat -- and low center of
gravity -- is important. But it's difficult to spin real fast--essential
for rolling out of forward drops--if the seat's too low and your legs
are radically bent. I use a quick release on my MUni and can quickly
adjust for different conditions.
3. You can't jump very high if you can't kick in your quads and you
can't kick in your quads if your legs are too straight. BBall players
and high jumpers don't dip too low before jumping, but they have a lot
of forward momentum which they translate into heigth. For static hops
(out of a still stand), you've got to be able to dip down and also tuck
once airborn, and if the seat is so high that it hits your crotch, you
can neithr dip or tuck.
4. For seat-out (SIF) hopping, having a low seat is actually harder
than moving it up a bit.
Bottom line: no one seat heigth fits all conditions. Knowing what
works for you, and when, and using a quick release, means you're
flexible to different conditions. Always a good thing.
JL
--
vivalargo - Santa Barbara Unicycle Club
------------------------------------------------------------------------
vivalargo's Profile: http://www.unicyclist.com/profile/5625
View this thread: http://www.unicyclist.com/thread/36775