Handlebar help

"Telewanker" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

How do drop bars come off of a road bike? The stem doesn't have a

removable

Quoted message said:

face like my mtb- only one bolt pinches the stem shut on the drop bars. Do the drop bars come
apart and slide out some how? Thanks for any help. TW

One side of the handlebar has to be 'stripped', tape removed, levers removed, then the bar is taken
out of the stem. Have new bar tape at the handy as sometimes the old tape will tear or self-destruct
as it is removed. Now would be a good time to think about a new stem, with a removable faceplate.
Saves lots of aggravation, not to say the price of a box of bar tape.

"Dave Thompson" <[email hidden]> wrote in message news:4NxCa.33892$M01.9934@sccrnsc02...

Quoted message said:

"Telewanker" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

How do drop bars come off of a road bike? The stem doesn't have a

removable

Quoted message said:

face like my mtb- only one bolt pinches the stem shut on the drop bars. Do the drop bars come
apart and slide out some how? Thanks for any help. TW

One side of the handlebar has to be 'stripped', tape removed, levers removed, then the bar is
taken out of the stem. Have new bar tape at the handy as sometimes the old tape will tear or
self-destruct as it is

removed.

Quoted message said:

Now would be a good time to think about a new stem, with a removable faceplate. Saves lots of
aggravation, not to say the price of a box of bar tape.

Or, if you've found a new stem (assuming you're changing stems in the first place), and don't have
any real attachment to the old one, you could very carefully hacksaw a line on the top-back,
opposite the screw, halfway through the metal or so. Then spread the front apart (a coin in there
and screw the screw back works, from the opposite side if necessary) until it bends or breaks. yeah,
it'll destroy the stem, but you won't have to remove anything from the bar, and as long as you've
got a replaceable face on the new one, then you're good to go.

Jon Bond

"Telewanker" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

How do drop bars come off of a road bike? The stem doesn't have a

removable

Quoted message said:

face like my mtb- only one bolt pinches the stem shut on the drop bars. Do the drop bars come
apart and slide out some how?

To change a road handlebar: Untape the bars and remove the levers. Unscrew the stem bolt - the one
you look down on while riding - a few turns. If the stem is wedged, it will lift right out. If not,
tap the stem bolt to release the cone inside and then lift out the stem.

Now loosen and then remove the binder bolt which holds the handlebar in the stem. Prise the stem
open slightly so you can slide the stem off the bar without scratching the handelbar. Note that
clamo area of the stem has one side which is narrower. Keep that part to the inside of the curve and
slip the stem off the end of the bar.

Although you'd think you could remove the bar while the stem is in the bike, there suddenly isn't
much room as you twist the handlebar around and the paint in the head tube often suffers for that.

Do lubricate all the fasteners on installation. Before you ride, stand in front of the bike and put
your full weight on the levers. If the levers or bar move you will be happy to know that before
you're on the bike.
--
Andrew Muzi yellowjersey.orgyellowjersey.orgOpen ↗ Open every day since 1 April 1971

Pete-<< How do drop bars come off of a road bike? The stem doesn't have a removable face like my
mtb- only one bolt pinches the stem shut on the drop bars. Do the drop bars come apart and slide
out some how?

This speaks volumes about where the industry is goin'...

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"

(Qui si parla Campagnolo) said:

Pete-<< How do drop bars come off of a road bike? The stem doesn't have a removable face like my
mtb- only one bolt pinches the stem shut on the drop bars. Do the drop bars come apart and slide
out some how?

This speaks volumes about where the industry is goin'...

Specially when the guy asking the question gives his name as "telewanker".

Jasper

"Qui si parla Campagnolo" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Pete-<< How do drop bars come off of a road bike? The stem doesn't have a removable face like my
mtb- only one bolt pinches the stem shut on the drop bars. Do the drop bars come apart and slide
out some how?

This speaks volumes about where the industry is goin'...

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"

Hadn't been on a bike in many years, since I was a kid actually. Bought a mtb about 5 years ago, had
the removable face on the stem. Two years ago, bought road tandem, same setup. I recently acquired
an old Bianchi (not a very good deal it turns out) with a quill stem. It looks nicer than the stem
on the tandem, but what a pain to remove the handlebars! Removable face plate may not be quite as
much an improvement as STI/Ergo shifters, but still seems like a big improvement to me. The stem on
it looks nicer than a mtb type stem, but is there really any advantage to this older type? Paul

Paul Westall said:

Hadn't been on a bike in many years, since I was a kid actually. Bought a mtb about 5 years ago,
had the removable face on the stem. Two years ago, bought road tandem, same setup. I recently
acquired an old Bianchi (not a very good deal it turns out) with a quill stem. It looks nicer than
the stem on the tandem, but what a pain to remove the handlebars! Removable face plate may not be
quite as much an improvement as STI/Ergo shifters, but still seems like a big improvement to me.
The stem on it looks nicer than a mtb type stem, but is there really any advantage to this older
type? Paul

The modern threadless stems with a face plate are very practical, probably stronger as well.

The old Cinelli (Record?) stems were a work of art. Compleatly hidden clamping mechanism, totally
smoth profile.

They were also nice to ride with as you could grasp the handlebar in the

campyonly.combianchi3.jpgOpen ↗

It makes my the TTT 'the stem' i have on my bike look like a tractor part.

wiggle.co.ukv2 product detail.aspOpen ↗

--
Andy Morris

AndyAtJinkasDotFreeserve.Co.UK

Love this: Put an end to Outlook Express's messy quotes
home.in.tum.deoe quotefixOpen ↗

Do you mean removing the bars from the stem? You have to remove everything from the bars on at least
one side of the stem, then loosen the single bolt, usually under the bars on the front of the stem,
and slide it around and off.

That's why I got a road stem with a removable face!

May you have the wind at your back. And a really low gear for the hills! Chris

Chris'Z Corner "The Website for the Common Bicyclist": geocities.comczcornerOpen ↗

"AndyMorris" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

The modern threadless stems with a face plate are very practical,

probably

Quoted message said:

stronger as well.

The old Cinelli (Record?) stems were a work of art. Compleatly

hidden

Quoted message said:

clamping mechanism, totally smoth profile.

I had one of those (model 1R) and it was definitely not as good as more basic stems like the 1A. But
stems with removable face plates top them all for convenience. They're an real improvement.

JT

--
*******************************************
NB: reply-to address is munged

Visit jt10000.comjt10000.comOpen ↗
*******************************************

TTT Mutant (removeable faceplate) ain't all bad.

App

"AndyMorris" <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

Paul Westall said:

Hadn't been on a bike in many years, since I was a kid actually. Bought a mtb about 5 years ago,
had the removable face on the stem. Two years ago, bought road tandem, same setup. I recently
acquired an old Bianchi (not a very good deal it turns out) with a quill stem. It looks nicer
than the stem on the tandem, but what a pain to remove the handlebars! Removable face plate may
not be quite as much an improvement as STI/Ergo shifters, but still seems like a big improvement
to me. The stem on it looks nicer than a mtb type stem, but is there really any advantage to
this older type? Paul

The modern threadless stems with a face plate are very practical, probably stronger as well.

The old Cinelli (Record?) stems were a work of art. Compleatly hidden clamping mechanism, totally
smoth profile.

They were also nice to ride with as you could grasp the handlebar in the

Quoted message said:

campyonly.combianchi3.jpgOpen ↗

It makes my the TTT 'the stem' i have on my bike look like a tractor part.

wiggle.co.ukv2 product detail.aspOpen ↗

--
Andy Morris

AndyAtJinkasDotFreeserve.Co.UK

Love this: Put an end to Outlook Express's messy quotes
home.in.tum.deoe quotefixOpen ↗