Cycling Equipment · Public discussion

cross-chaining - how much is too much?

Started by wle · · Last activity · 3 posts · 398 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
9 November 2004
Last activity
9 November 2004
Original author
wle
Posts
3
Discussion status
Public discussion
Total views
398
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–3 of 3
Posts remain in their original chronological order.

Text size
  1. ok.

    i have a plain vanilla road bike with 53-42 chain ring in
    front and 7 speed, 26-13 cassette in the rear.

    700c wheels.

    i ran through mr sheldon brown;s gear calculator and
    found out that there is overlap between 3 pairs of gears,
    they are practically the same.

    comes out like this..
    [mph @ 100 rpm]
    32.7 24.7
    28.4 21.4
    25.0 18.9
    22.4 16.9
    20.3 15.3
    18.5 14.0
    16.4 12.4

    if the speed i want is between 20 and 25 mph, no choice is good,
    they all seem to involve too much cross chaining.

    or is it?

    should i only worry about going all the way across all 6[24.7 or 16.4]?
    is 5 gears ok?
    surely 4 would be ok?

    how much is too much cross chaining?

    i regularly do a '5 gear cross', small front ring and number 6 on the back.

    but usually i steer clear of large front + 1-4 in the back.

    wle.

  2. -----BEGIN PGP SIGNED MESSAGE-----

    In article <[email hidden]>,

    wle said:

    ok.

    i have a plain vanilla road bike with 53-42 chain ring in
    front and 7 speed, 26-13 cassette in the rear.


    [snip]

    Quoted message said:


    if the speed i want is between 20 and 25 mph, no choice is good,
    they all seem to involve too much cross chaining.

    or is it?

    should i only worry about going all the way across all 6[24.7 or 16.4]?
    is 5 gears ok?
    surely 4 would be ok?

    how much is too much cross chaining?

    _ Nobody can answer this. I think even the most rabid
    anti-crosser would allow 4 gears. People make a much
    bigger deal of this than it really is. In general if
    you have choice between two very similar gears, one
    badly crossed and one straight, then you might want
    to worry about it ( I don't ), however if it's the only
    gear you have that matches your speed and revs use it.

    Quoted message said:


    i regularly do a '5 gear cross', small front ring and number 6 on the back.

    but usually i steer clear of large front + 1-4 in the back.

    _ Ride the gears that make you the most comfortable and regularly
    measure your chain wear, if your chain lasts as long as anybody
    else's then you're using the "right gears". In general,
    small/small is the one you want to avoid more than big/big. And
    heck even if your chain wears a bit faster than normal, so what.
    The important thing is to check the chain regularly and replace
    it before a stretched chain can damage the rest of your
    drivetrain. Park makes a nifty little relatively cheap guage
    to do this without even removing the chain from the bike.

    _ Booker C. Bense

    -----BEGIN PGP SIGNATURE-----
    Version: 2.6.2

    iQCVAwUBQZEQcGTWTAjn5N/lAQFpagQAuYDk2gj2tLN96qbHlVuZWOwzs/q9NuCH
    CxupoXMxxZCujtKT00hRs3WosrVAlQU8rbqJs9qsPHDS3TzPfB0y8NUl2eC4CZVS
    loEGUkTv/PwiZS3yZkNk81ZLTYsyoKgmxrsEQOuTB3afwxVZvwKkXt8zotHY7wKn
    J+4ETbJKs1U=
    =orrr
    -----END PGP SIGNATURE-----

  3. Booker C. Bense said:

    In article <[email hidden]>,
    wle <[email hidden]> wrote:

    Quoted message said:
    Quoted message said:

    if the speed i want is between 20 and 25 mph, no choice is good,
    they all seem to involve too much cross chaining.


    ....

    Quoted message said:
    Quoted message said:

    how much is too much cross chaining?

    _ Nobody can answer this. I think even the most rabid
    anti-crosser would allow 4 gears. People make a much
    bigger deal of this than it really is. In general if
    you have choice between two very similar gears, one
    badly crossed and one straight, then you might want
    to worry about it ( I don't ), however if it's the only
    gear you have that matches your speed and revs use it.

    I agree. I tend to mainly use the large chainring
    and frequently ride hills in the 52/30 combination even
    though 39/23 would give about the same ratio with
    a better chain angle.

    But my chains last for 6-8 thousand miles, cassettes
    for over 20 thousand, and over 100 thousand for
    chain rings. That doesn't seem like excessively
    fast wear compared to what I've heard from others
    so it's not clear to me what harm I'm doing to the
    drivetrain with a larger chain angle. Perhaps a
    slight loss of efficiency, but I doubt if it's
    enough to notice since I'm not riding competitively.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.