is it my imagination or is my deore freehub, by design, slower thru
friction than the spare wheel freehubs?
is my freehub adjustment incorrect?
does the phil wood touring freewheel hub bend axles under load like an
OLD/sugue freewheel?
Cycling Equipment · Public discussion
freewheel vs freehub?
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 16 October 2004
- Last activity
- 16 October 2004
- Original author
- g.daniels
- Posts
- 4
- Discussion status
- Public discussion
- Total views
- 663
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
"g.daniels" <[email hidden]> wrote in message
news:[email hidden]...Quoted message said:
is it my imagination or is my deore freehub, by design, slower thru
friction than the spare wheel freehubs?
is my freehub adjustment incorrect?
does the phil wood touring freewheel hub bend axles under load like an
OLD/sugue freewheel?No.
-
(g.daniels) said:
is it my imagination or is my deore freehub, by design, slower thru
friction than the spare wheel freehubs?The difference should be trivial if any.
Quoted message said:
is my freehub adjustment incorrect?
Maybe the axle bearing adjustment is not right; that would be the
first place I'd look.Quoted message said:
does the phil wood touring freewheel hub bend axles under load like an
OLD/sugue freewheel?No data on that one.
--
Typoes are a feature, not a bug.
Some gardening required to reply via email.
Words processed in a facility that contains nuts. -
g.daniels said:
is it my imagination or is my deore freehub, by design, slower thru
friction than the spare wheel freehubs?
is my freehub adjustment incorrect?
does the phil wood touring freewheel hub bend axles under load like an
OLD/sugue freewheel?
Resistance while coasting varies a lot by the seals used and
the lubricant (or lack thereof) inside.
As with any traditional loose-ball hub, adjust for the
faintest amount of barely perceptible play, then evaluate
after the skewer is closed. You're seeking a slight, not an
excessive, preload.
Phil freewheel hubs share the design deficiencies of that
format (Bearing too far from the right, leaving an
unsupported cantilevered axle which breaks) but Phil's big
fat 16mm stainless axle gives less trouble in service than a
wimpy 10mm threaded axle.Did you mean Suzue hubs? Nice product. Rebuild with new
balls in fresh clean grease for many years of life.Bent axles on single freewheel hubs are rare outside of
Freestyle. With four or 5 speeds, axle bending is a
possibility. With six a common event, with seven likely and
with an eight speed freewheel a virtual certainty.
--
Andrew Muzi
www.yellowjersey.org
Open every day since 1 April, 1971
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.