Kh Problems!

I am not sure where you have this information from. This is not the
case. 30 day warranty? since when? Free wheel - never, impossible.
We know what the problem is, it is not on a 100% of the hub/unicycles
that have been produced since May by any means, but it does seam to be
affecting quite a few.
We are totally understandable about the situation and if you have fixed
it, it will not invalidate the warranty for this.
Unicycle.com in the US are recalling any that are showing problems and
rectifying the problem permanently. They are also modifying ALL of
their existing stock, this is delaying dispatch slightly as they do hold
a lot of stock. So please be patient with them.
total uni - please do not attempt to be a spokesperson for Unicycle.com,
if you are worried about anything about the warranty or problems with
your products please contact your local Unicycle.com.

Roger

--
rogeratunicycledotcom - ok ish Unicyclist
------------------------------------------------------------------------
rogeratunicycledotcom's Profile: http://www.unicyclist.com/profile/4116
View this thread: http://www.unicyclist.com/thread/35569

i have heard that 3 people have gone free wheel.sry about the 30 day
part and that was me thinking of the return poliolise

--
total uni - bikes suck-unicycles rule
------------------------------------------------------------------------
total uni's Profile: http://www.unicyclist.com/profile/8125
View this thread: http://www.unicyclist.com/thread/35569

total uni said:

*i have heard that 3 people have gone free wheel.sry about the 30 day
part and that was me thinking of the return poliolise *

Roger is right. Let unicycle.com speak for themselves. If it were that
big of a deal they'd e-mail or contact everyone who had bought the
product and notify them of the flaw.

Unicycles don't go freewheel, except for a few rare cases in the suzue
hub. THe KH hub is press fit into the flange setup, and has 2 or 6 (i
forget which) keyways in it. It can't go freewheel. I don't believe that
you've heard of 3 KH hubs going freewheel firstly because it virtually
impossible, and secondly because at least one of those people would've
said something about it happening. SO anyways, unless you are absolutely
sure that they have gone freewheel, please don't spread rumors.

--
gerblefranklin - Trials Unicyclist

Don't you think it's a cruel irony that acting like a G.I. Joe in the
army can get you a Medal, while playing with one can get you thrown
out?

http://gallery.unicyclist.com/Trials-Muni

"Our enemies are innovative and resourceful. They will stop at nothing
to hurt us and our people, and nethier will we"-Dubya
Vote Kerry. Yeah, they both suck, but Kerry sucks less.
------------------------------------------------------------------------
gerblefranklin's Profile: http://www.unicyclist.com/profile/4295
View this thread: http://www.unicyclist.com/thread/35569

is the problem u are talking about where it kind of clicks all the
time?if it is then im having that problem to. cause i have had mine only
a few months.

--
khtrials
------------------------------------------------------------------------
khtrials's Profile: http://www.unicyclist.com/profile/7823
View this thread: http://www.unicyclist.com/thread/35569

gerblefranklin said:

*

Roger is right. Let unicycle.com speak for themselves. If it were that
big of a deal they'd e-mail or contact everyone who had bought the
product and notify them of the flaw.

Unicycles don't go freewheel, except for a few rare cases in the suzue
hub. THe KH hub is press fit into the flange setup, and has 2 or 6 (i
forget which) keyways in it. It can't go freewheel. I don't believe
that you've heard of 3 KH hubs going freewheel firstly because it
virtually impossible, and secondly because at least one of those
people would've said something about it happening. SO anyways, unless
you are absolutely sure that they have gone freewheel, please don't
spread rumors. *

I think hey was saying the wheels were replaced with free wheels. Not
that they became freewheeling unicycles because the keyways failed.
There are 6 BTW.

--
TheObieOne3226 - Judge me by my size, do you?

[image: http://img54.exs.cx/img54/4743/yodaweedresize.jpg]
http://gallery.unicyclist.com/SWAT
singlewheeledattackteam.1hwy.com
------------------------------------------------------------------------
TheObieOne3226's Profile: http://www.unicyclist.com/profile/4851
View this thread: http://www.unicyclist.com/thread/35569

is the problem u are talking about where it kind of clicks all the
time?if it is then im having that problem to. cause i have had mine only
a few months.

I am having this problem I have had mine for 3 weeks, I think it is one
of the bearings going bad, I believe the left one. Know where I can get
another bearing at didnt see them listed on unicycle.com, or is it
covered under warranty or what? I have the clicking problem also.

--
billdavey23
------------------------------------------------------------------------
billdavey23's Profile: http://www.unicyclist.com/profile/7004
View this thread: http://www.unicyclist.com/thread/35569

The problem that everyone is talking abut is the axle moving inside the
hub. Not a clicking. If you have any problems or any questions i am
sure that if you call unicycle.com they can help you.

--
runi2024
------------------------------------------------------------------------
runi2024's Profile: http://www.unicyclist.com/profile/6996
View this thread: http://www.unicyclist.com/thread/35569

TCUC's club KH is starting to have slop in it and it's only a month
old...

--
tuna6869 - Unicycler for Kerry

Jamey Mossengren

Smile! 🙂 It makes people wonder what you're up to!

"Life is not measured by the number of breaths we take, but by the
moments that take our breath away"

------------------------------------------------------------------------
tuna6869's Profile: http://www.unicyclist.com/profile/1526
View this thread: http://www.unicyclist.com/thread/35569

The problem is where there is actually movement seen on one crank when
you move the other crank even when the bolts are very tight.

Regards

Roger

--
rogeratunicycledotcom - ok ish Unicyclist
------------------------------------------------------------------------
rogeratunicycledotcom's Profile: http://www.unicyclist.com/profile/4116
View this thread: http://www.unicyclist.com/thread/35569

any solutions??

--
billdavey23
------------------------------------------------------------------------
billdavey23's Profile: http://www.unicyclist.com/profile/7004
View this thread: http://www.unicyclist.com/thread/35569

could you tell us more because i am seriously considering getting a kh
trials wheelset, is this a problem with all of the hubs or just some

--
General Dibbles - Street Unicyclist

"When the going gets weird, the weird turn pro" Dr. Hunter S. Thompson
------------------------------------------------------------------------
General Dibbles's Profile: http://www.unicyclist.com/profile/8108
View this thread: http://www.unicyclist.com/thread/35569

billdavey23 said:

*any solutions?? *

To what noise or movement?

Actually both can be solved by makeing sure everything is tight that can
be. If movement/noise persists then follow John Childs instructions and
bond the hub/keyway in position.

Roger

--
rogeratunicycledotcom - ok ish Unicyclist
------------------------------------------------------------------------
rogeratunicycledotcom's Profile: http://www.unicyclist.com/profile/4116
View this thread: http://www.unicyclist.com/thread/35569

Some. Not all by any means.

All the stock at Unicycle.com are being delt with prior to being
distpatched. So there should be no more with problems.

Roger

--
rogeratunicycledotcom - ok ish Unicyclist
------------------------------------------------------------------------
rogeratunicycledotcom's Profile: http://www.unicyclist.com/profile/4116
View this thread: http://www.unicyclist.com/thread/35569

thank you

--
General Dibbles - Street Unicyclist

"When the going gets weird, the weird turn pro" Dr. Hunter S. Thompson
------------------------------------------------------------------------
General Dibbles's Profile: http://www.unicyclist.com/profile/8108
View this thread: http://www.unicyclist.com/thread/35569

one more question (sorry for the thread jacking) does a kh wheelset fit
a 20 inch yuni frame as far as the bearing are concerned

--
General Dibbles - Street Unicyclist

"When the going gets weird, the weird turn pro" Dr. Hunter S. Thompson
------------------------------------------------------------------------
General Dibbles's Profile: http://www.unicyclist.com/profile/8108
View this thread: http://www.unicyclist.com/thread/35569

yes and no....

Been doing a lot of these exact answers recently havn't I.

The bearings on the KH are 42mm, the ones on the Yumi are 40mm. But....
because the bearing holders are pressed steel they tend to be able to
fit the larger bearings in, but only just. You tend to need longer
bolts though.

Hope this helps.

Rogr

--
rogeratunicycledotcom - ok ish Unicyclist
------------------------------------------------------------------------
rogeratunicycledotcom's Profile: http://www.unicyclist.com/profile/4116
View this thread: http://www.unicyclist.com/thread/35569

i thought i read somewhere that the kh bearings have a shim on them is
this true and if so could i remove the shim to make the yuni frame fit
better

--
General Dibbles - Street Unicyclist

"When the going gets weird, the weird turn pro" Dr. Hunter S. Thompson
------------------------------------------------------------------------
General Dibbles's Profile: http://www.unicyclist.com/profile/8108
View this thread: http://www.unicyclist.com/thread/35569