Vistalite nightstick charger help

"Gemma Kernich" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Hi All, Can anyone please tell me what specifications the original charger for the VistaLite
Nightstick Ni-Cad 2000mAH battery has? (In V and mA please - it should say on the charger
somewhere I hope!) I need to get a charger to suit....

Cheers Gemma

Can't help. Sorry. I've got the Nightstick 15 which is NiMh.

--
Alan Erskine alanerskine(at)optusnet.com.au GWB the Ghengis Khan of the 21st Century

"Anthony N" <[email hidden]> wrote in message
news:oRDwa.840926$3D1.481575@sccrnsc01...

Quoted message said:

Quoted message said:

Back of the VistaLite charge reads:

Class 2 transformaer Model No. R410706 Input: 120VAC 60Hz 7W Output: 7.2VDC 600mA

Hope that helps.

Bill

Odds, mine says:

Class 2 Transformer Model No. R350803 Input: 120VAC 60Hz 6W Output: 7.2VDC 300mA

Can anyone else confirm?

Can you check whether you're using the same battery as me? I think the Ni-Cad's chargers are
different to the NiMh's. I am after the charger for the black Ni-Cad nightstick. There is a bit of a
difference between 300 and 600 mA output! I think we've agreed though that the output voltage is
7.2DCV! Cheers Gemma
ps. you don't need to worry about the input figures - they depend on where you are in the world! We
have 240V AC here in Oz for example 🙂

"Alan Erskine" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Quoted message said:

Can anyone please tell me what specifications the original charger

for the

Quoted message said:

Quoted message said:

VistaLite Nightstick Ni-Cad 2000mAH battery has? (In V and mA please - it should say on the
charger somewhere I

hope!)

Quoted message said:

Quoted message said:

I need to get a charger to suit....

Cheers Gemma

Can't help. Sorry. I've got the Nightstick 15 which is NiMh.

I have two of these.. should start using them I guess... mmm 30W instead of ~1W :-)

Gemma, this page doesn't have specs but has a large discussion about the VistaLights:
tdc-www.harvard.edu0287.htmlOpen ↗

They seem to say that the standard chargers are rubbish and you should use a "smart" charger anyway.
It also mentions "bikecurrent" which I think is a bike light mailing list on Topica - they might
have more answers for you. Try googling for "bikecurrent"?? Actually, I just did and the bikecurrent
FAQ says that the NiCads do not suffer from the "dumb" charger problem...

Sorry I couldn't be more helpful hippy

"Gemma Kernich" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

"Anthony N" <[email hidden]> wrote in message
news:oRDwa.840926$3D1.481575@sccrnsc01...

Quoted message said:

Quoted message said:

Back of the VistaLite charge reads:

Class 2 transformaer Model No. R410706 Input: 120VAC 60Hz 7W Output: 7.2VDC 600mA

Hope that helps.

Bill

Odds, mine says:

Class 2 Transformer Model No. R350803 Input: 120VAC 60Hz 6W Output: 7.2VDC 300mA

Can anyone else confirm?

Can you check whether you're using the same battery as me? I think the Ni-Cad's chargers are
different to the NiMh's. I am after the charger for the black Ni-Cad nightstick. There is a bit of
a difference between 300

and

Quoted message said:

600 mA output! I think we've agreed though that the output voltage is
7.2DCV! Cheers Gemma
ps. you don't need to worry about the input figures - they depend on where you are in the world!
We have 240V AC here in Oz for example 🙂

I have both types of battery. I gave the spec for the NiCad earlier. Bill posted the spec for the
NiMh. Actually, a good place to confirm is to email www.pricepoint.com and check. They are selling
the NiCad version at this link: pricepoint.comproduct1968.htmlOpen ↗. They also sell the NiHm one
so make sure they check the right one.

"Gemma Kernich" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Hi All, Can anyone please tell me what specifications the original charger for the VistaLite
Nightstick Ni-Cad 2000mAH battery has? (In V and mA please - it should say on the charger
somewhere I hope!) I need to get a charger to suit....

Hi Gemma,

The NiCd nightsticks use a 7.2V, 300mA charger, while the NiMH ones use a
7.2V, 600mA charger.

I have the NiCd one.

Regards,

Suzy

--
---
Suzy Jackson [email hidden] suzyj.netsuzyj.netOpen ↗

Gemma Kernich said:

Can anyone please tell me what specifications the original charger for the VistaLite Nightstick
Ni-Cad 2000mAH battery has?

The specs of the power supply (step down transformer) supplied with product for the oz market was:

input: 240V AC 50Hz output: 7.2V DC, 300mA, positive tip

Phantom should be able to supply an original. Otherwise, a variable output interchangeable tip unit
from [censored] Smith (eg: Phillips) rated circa 300mA should do the trick.

cheers

Iguana Bwana

Gemma Kernich said:

Quoted message said:

Back of the VistaLite charge reads:

Quoted message said:

Quoted message said:

Quoted message said:

Class 2 transformaer Model No. R410706 Input: 120VAC 60Hz 7W Output: 7.2VDC 600mA

That's the one for the US market *NiMH* nightstick.

Quoted message said:

Quoted message said:

Class 2 Transformer Model No. R350803 Input: 120VAC 60Hz 6W Output: 7.2VDC 300mA

Can anyone else confirm?

That's the one for the US market *nicad* nightstick.

Iguana Bwana

Hi everyone, this be my first post. I've ordered a Vistalite over the net fron the states, it's arrived and of course has a different charger, rated at the US 120 volts as opposed to our 240. Where do I stand as far as getting the charger to work? I;ve got an adapter so it'll fit in the power point but I don't wanna use it just yet, as I've no wish to toast it!

Any help would be greatly appreciated.

Thanks!

Ben

"benmatt" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Hi everyone, this be my first post. I've ordered a Vistalite over the net fron the states, it's
arrived and of course has a different charger, rated at the US 120 volts as opposed to our 240.
Where do I stand as far as getting the charger to work? I;ve got an adapter so it'll fit in the
power point but I don't wanna use it just yet, as I've no wish to toast it!

Any help would be greatly appreciated.

Thanks!

Ben

Go to a travel shop and see if they have a 120/240 adaptor - you may have to order it as the
'normal' would be 240/120 in Australia (going from Australia to US would be 240/120 change), but
ask first.

--
Alan Erskine alanerskine(at)optusnet.com.au Is Lewis Moran the type of father figure John Howard
wants for Australian children?

Try these, www1.jaycar.com.auproductView.aspOpen ↗
dse.com.auM1155Open ↗ ht-
tp://www.korjo.com.au:80//product.asp?dept%5Fid=15&pf%5Fid=SDT+98&mscssid=DJK5VC5FHL649NV4BFUWV6NJ5-
E5V3TR7 Considering an appropriate Step-down voltage converter will be $49 or more, It'd probably be
cheaper to replace the charger with one designed for 240V.

Alan Erskine said:

"benmatt" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Hi everyone, this be my first post. I've ordered a Vistalite over the net fron the states, it's
arrived and of course has a different charger, rated at the US 120 volts as opposed to our 240.
Where do I stand as far as getting the charger to work? I;ve got an adapter so it'll fit in the
power point but I don't wanna use it just yet, as I've no wish to toast it!

Any help would be greatly appreciated.

Thanks!

Ben

Go to a travel shop and see if they have a 120/240 adaptor - you may have to order it as the
'normal' would be 240/120 in Australia (going from Australia to US would be 240/120 change), but
ask first.

--
Alan Erskine alanerskine(at)optusnet.com.au Is Lewis Moran the type of father figure John Howard
wants for Australian children?

"benmatt" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Hi everyone, this be my first post. I've ordered a Vistalite over the net fron the states, it's
arrived and of course has a different charger, rated at the US 120 volts as opposed to our 240.
Where do I stand as far as getting the charger to work? I;ve got an adapter so it'll fit in the
power point but I don't wanna use it just yet, as

I've

Quoted message said:

no wish to toast it!

Have a look at the VistaLite charger and see if it is "universal", i.e. has two voltages written on
it. If it has something like "240/60Hz ... 110/50Hz" (I can't remember exactly) then it is likely it
will work with a simple plug adaptor. I don't have my charger handy to check this. If it only has
one voltage on it (110V) you will need something to change the voltage too. --Disclaimer.. I am not
an electrician, listen/live at your own risk!

hth hippy

Quoted post said:

Originally posted by benmatt
Hi everyone, this be my first post. I've ordered a Vistalite over the net fron the states, it's arrived and of course has a different charger, rated at the US 120 volts as opposed to our 240. Where do I stand as far as getting the charger to work? I;ve got an adapter so it'll fit in the power point but I don't wanna use it just yet, as I've no wish to toast it!

Any help would be greatly appreciated.

Thanks!

Ben

If you were thinking of getting another battery anyway (I did the same thing), then the easiest way is to puchase a battery/charger combo from somewhere like phantom cycles (around $79 + delivery).

Obviously it will mean you have 1 charger for 2 batt. but how often do you need to charge 2 at once anyway?!? (24hr races may be the exception)

[censored] Smith will sell you a transformer to convert 240v to 110v. I think the cost is about $40

troyq said:

benmatt said:

Hi everyone, this be my first post. I've ordered a Vistalite over the net fron the states,
it's arrived and of course has a different charger, rated at the US 120 volts as opposed to
our 240. Where do I stand as far as getting the charger to work? I;ve got an adapter so it'll
fit in the power point but I don't wanna use it just yet, as I've no wish to toast it! Any
help would be greatly appreciated. Thanks! Ben

If you were thinking of getting another battery anyway (I did the same thing), then the easiest
way is to puchase a battery/charger combo from somewhere like phantom cycles (around $79 +
delivery).

Obviously it will mean you have 1 charger for 2 batt. but how often do you need to charge 2 at
once anyway?!? (24hr races may be the exception)

--

Quoted message said:

--------------------------<

Posted via cyclingforums.com cyclingforums.comcyclingforums.comOpen ↗

(top post)

'nother suggestion is to return it to the supplier as it's not compatible with Australian current.
--
Alan Erskine alanerskine(at)optusnet.com.au Is Lewis Moran the type of father figure John Howard
wants for Australian children?

"Phil" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

[censored] Smith will sell you a transformer to convert 240v to 110v. I think the cost is about $40

troyq said:

benmatt said:

Hi everyone, this be my first post. I've ordered a Vistalite over

the

Quoted message said:

Quoted message said:

Quoted message said:

net fron the states, it's arrived and of course has a different charger, rated at the US 120
volts as opposed to our 240. Where do I stand as far as getting the charger to work? I;ve
got an adapter so it'll fit in the power point but I don't wanna use it just yet, as

I've

Quoted message said:

Quoted message said:

Quoted message said:

no wish to toast it! Any help would be greatly appreciated. Thanks! Ben

If you were thinking of getting another battery anyway (I did the same thing), then the easiest
way is to puchase a battery/charger combo from somewhere like phantom cycles (around $79 +
delivery).

Obviously it will mean you have 1 charger for 2 batt. but how often do you need to charge 2 at
once anyway?!? (24hr races may be the exception)

--

Quoted message said:

--------------------------<

Posted via cyclingforums.com cyclingforums.comcyclingforums.comOpen ↗

"Alan Erskine" wrote

Quoted message said:

'nother suggestion is to return it to the supplier as it's not compatible with Australian current.

The current is compatible! It's the voltage that is the problem.

Theo

Considering an appropriate Step-down voltage converter will be $49 or more,
: It'd probably be cheaper to replace the charger with one designed for
240V.

Agree

: Any help would be greatly appreciated.

Is it not a switching mode power supply that will auto detect the input voltage? A lot of modern
power supplies are like this (although cheaper ones will not). I think to do what you want will
require a stepdown transformer. I think that would be quite expensive compared to just buying
another power supply from somewhere like www.jaycar.com.au All you have to do is find out what the
output voltage and current you have and match it. One can be had for around $25 with a wide
selection of plugs to fit.

The current is compatible! It's the voltage that is the problem.
:
: Theo

Its a no-brainer. I have much equipment purchased out of the country. See Jaycar or other
electronics supplier.

Peter

"John Doe" wrote

Quoted message said:

Its a no-brainer. I have much equipment purchased out of the

country. See

Quoted message said:

Jaycar or other electronics supplier.

Only with equipment that uses modern efficient power supplies. Twenty years ago most stuff was
series regulated and some of the transformers that were designed to run on 60Hz did not take kindly
to 50Hz. There's still a lot of gear out there that uses transformers and 50Hz will generate a lot
more heat in the transformer than 60Hz as well as pass more current. It does require a brain.

Theo