I have a squeeky noise in my rear derailleur every time I am shifting to a lower gear with the chain in the large disk in the front derailleur. This is happening just as I make the change and it stops right afterwards.
Hoping any of you out there has some practical suggestions to get rid off this annoyance.
I have a squeeky noise in my rear derailleur every time I am shifting to a lower gear with the chain in the large disk in the front derailleur. This is happening just as I make the change and it stops right afterwards.
Hoping any of you out there has some practical suggestions to get rid off this annoyance.
I noticed a similar problem with my 105 derailleur after only about 1500km and found that one of the jockey wheel bearings had become completely dry and was rusting. The problem was solved by about 0.1c worth of grease. My mountain bike's rear derailleur, after about 10,000km of much wetter and rougher use, developed the same problem. It had "sealed" jockey wheel bearings. I wonder why the 105 derailleur doesn't come similarly equipped? If you haven't taken a derailleur cage apart before, be aware that on some (?old/current?) models the upper and lower wheels are not interchangeable, or so my LBS told me years ago. I don't know whether this is the case for 105, but I made sure I kept the parts separate.
If you haven't taken a derailleur cage apart before, be aware that on some (?old/current?) models the upper and lower wheels are not interchangeable, or so my LBS told me years ago. I don't know whether this is the case for 105, but I made sure I kept the parts separate.