Please help!

The bolts are spinning because the square part of the carriage bolt has
eith come right out of the hole it should be sitting in, or the bolt has
deformed that square hole in the plastic so it is now round.

Do you have a dremmel tool? if you cut a slot into the bolt, you may be
able to hold it with a flat head screw driver, and using wrench to turn
the bolt.

Go ahead and order a Roach cover now, becuase you'll most likely be
wanting to rip that seat apart to get at the heads of the bolts.

Spickydoo was able to replace the existing cover, so you won't 'need' a
new cover, but it's alot less of a pain in the ass if you have the $ to
spend.

Good luck.

A CF base will also fix your problems

--
Brian MacKenzie - Shades of Scorpius
------------------------------------------------------------------------
Brian MacKenzie's Profile: http://www.unicyclist.com/profile/7650
View this thread: http://www.unicyclist.com/thread/34962

Well thanks...I can't say I know what to do but atleast I know that I
won't be able to get some footage done this weekend...which isin't very
good news might I say...

Anyways, I'll take the thing apart and see what I can do...Oh, and about
the cover why is it -stappled- to the saddle? Am I gonna have to baicly
rip it off and duct tape it back on? (one thing I'm sure of though is
that duct tape WILL be used. It's inevetable)

Yeah, thanks.

Owen

--
Murde Mental - Unicycling Martyr

"Cyclists of the world unite!
You have nothing to lose but your other wheel!"

~Owen Kirby

------------------------------------------------------------------------
Murde Mental's Profile: http://www.unicyclist.com/profile/4463
View this thread: http://www.unicyclist.com/thread/34962

Murde Mental said:

*...duct tape WILL be used. It's inevetable...*

Check out my gallery for a picture of what I did to my old miyata seat.
It may inspire you, or give you an idea of what to avoid.

Removing the staples is easy. Just use a flathead screwdrive to pry them
off. Also, you don't need to use too much duct tape. When I can, I'll
post a pic of my current saddle, which is a miyata-style seatbase but a
KH seatcover. I used minimal ducttape, and it works fine, except that
the innertube I used for padding popped. Also, if the bolts are spinning
and you are doing 32" rolling hops, I'll tell you now, from experience,
that this is not something worth your time to repair. Take the seat
apart so as to save any and all parts you can, because I am 100% sure
that that seatbase is *very* near it's grave, due to the fact that the
reinforcement plate is probably toast. Basically, start saving up for a
cf seatbase, because that KH is not gonna last with the riding you seem
to be doing/capable of.

--
gerblefranklin - Trials Unicyclist

Don't you think it's a cruel irony that acting like a G.I. Joe in the
army can get you a Medal, while playing with one can get you thrown
out?

http://gallery.unicyclist.com/Trials-Muni

"Our enemies are innovative and resourceful. They will stop at nothing
to hurt us and our people, and nethier will we"-Dubya
Vote Kerry. Yeah, they both suck, but Kerry sucks less.
------------------------------------------------------------------------
gerblefranklin's Profile: http://www.unicyclist.com/profile/4295
View this thread: http://www.unicyclist.com/thread/34962

I'll see what I'll do...I the meantime I guess I'll be doing alot of
trials-ish stuff with my united cause they're still one of the best for
seat-out hops... It's too bad though cause I had these two lines that I
finally got my guts together to do and I was planning on filming them...
Both big-drop scenes one of them form a balcony and "perhaps" over a
pine tree another was a drop from a tool-shed and over a fence or onto
it...

I'll see what I can do.

--
Murde Mental - Unicycling Martyr

"Cyclists of the world unite!
You have nothing to lose but your other wheel!"

~Owen Kirby

------------------------------------------------------------------------
Murde Mental's Profile: http://www.unicyclist.com/profile/4463
View this thread: http://www.unicyclist.com/thread/34962

was the 32" rolling hop with the kh24??

-grant

--
tennisgh22 - Haha you fool

The word gullible is written above my avatar!
------------------------------------------------------------------------
tennisgh22's Profile: http://www.unicyclist.com/profile/5771
View this thread: http://www.unicyclist.com/thread/34962

No, no...I use a profiles trials set-up wich just so happenes to have a
kh saddle.

--
Murde Mental - Unicycling Martyr

"Cyclists of the world unite!
You have nothing to lose but your other wheel!"

~Owen Kirby

------------------------------------------------------------------------
Murde Mental's Profile: http://www.unicyclist.com/profile/4463
View this thread: http://www.unicyclist.com/thread/34962