x eyed midship rack installation

In article <[email hidden]>, [email hidden] says...

Quoted message said:

i finally got around to opening my midship x eyed rack to install today, rainy day here.... the
instructions were not within my comprehension, and there were no pictures or sketches to give me a
idea of what they where talking about! the email bounced at [email hidden] and i will not
be around during the day to try the reach number. any one have any links to a better description
of the installation. a simple sketch would work, i hate to waste time with very poor instructions,
especially on a very expensive rack!

For RANS or Bacchetta???

Assuming Bacchetta, You have two tabs hanging under each side of the Bacchetta Seat. Bolt the two
"U" shape pieces to these tabs. so that the tube that the pannier hooks over is horizontal to the
ground. Use the flat pieces as spacers to achieve 'level' on connecting the rear tabs to the "U".
Now you have one piece left over. Bolt it to the bottom of the "U's" to provide stability.

Here are come Pictures: clee.orgdefault.cfmOpen ↗

FWIW, I had no instructions other than the picture above when I installed mine.

--
Cletus D. Lee Bacchetta Giro Lightning Voyager clee.orgclee.orgOpen ↗
- Bellaire, TX USA -

Quoted message said:

For RANS or Bacchetta???

woops ............rans vrex..... u got pictures! i want pictures! thanks

In article <[email hidden]>, [email hidden] says...

Quoted message said:

Quoted message said:

For RANS or Bacchetta???

woops ............rans vrex..... u got pictures! i want pictures! thanks

Of course. Here is the install for the Stratus:
clee.orgdefault.cfmOpen ↗

You may need to place the "U" bracket above the rail on on end of a Vrex to achieve Horizontal
placement of the pannier mounting part of the triangle.

--
Cletus D. Lee Bacchetta Giro Lightning Voyager clee.orgclee.orgOpen ↗
- Bellaire, TX USA -

Cletus D. Lee <[email hidden]> wrote in message
news:<[email hidden]>...

Quoted message said:

In article <[email hidden]>, [email hidden] says...

Quoted message said:

Quoted message said:

For RANS or Bacchetta???

woops ............rans vrex..... u got pictures! i want pictures! thanks

Of course. Here is the install for the Stratus:
clee.orgdefault.cfmOpen ↗

thanks the pictures help a lot, the included instructions were pure gibberish