I just built my first wheel (front) on my Park [font='Arial Narrow'][font=Verdana]TS-2 Professional Truing Stand and it turned out nicely. In building the rear wheel I am unable to get the wheel to center in the calipers. Can you please help with advice to get the proper dish, etc. on this wheel. It is a Shimano XT hub and Velocity Cliffhanger rim. Thanks for any input...Doug Atwell[/font][/font]
Cycling Equipment · Public discussion
Wheel Dishing Woes
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 13 December 2007
- Last activity
- 13 December 2007
- Original author
- Doug Atwell
- Posts
- 3
- Discussion status
- Public discussion
- Total views
- 1,523
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Doug Atwell said:
I just built my first wheel (front) on my Park [font='Arial Narrow'][font=Verdana]TS-2 Professional Truing Stand and it turned out nicely. In building the rear wheel I am unable to get the wheel to center in the calipers. Can you please help with advice to get the proper dish, etc. on this wheel. It is a Shimano XT hub and Velocity Cliffhanger rim. Thanks for any input...Doug Atwell[/font][/font]
http://www.parktool.com/repair/readinstructions.asp?id=135
Park Tool instructions for centering.
Separate dishing tool is the easier/faster way for varieties of wheels.
Or get the wheel true and flip it over in the stand. If/when it touches the left or right feeler (which ever is closest) when you flip the wheel, it is thn centered. In other words; let's say your wheel is true and you are checking it for centering. You close down the lateral adjustment until one side just touches the rim. You then flip the wheel over and adjust it's centering until it just touches the same side.
Boy, this is harder to put into word than it is the show you.
Was my explanation helpful? -
Thankyou David...I'll follow your suggestions. In my attempt to center the wheel I saw that it was trying to stay to one side of the calipers, so I'll let it. I'll also go ahead and get a dishing tool to be sure. Thanks again for your fast response...Doug Atwell
daveornee said:
parktool.comreadinstructions.aspOpen ↗
Park Tool instructions for centering.
Separate dishing tool is the easier/faster way for varieties of wheels.
Or get the wheel true and flip it over in the stand. If/when it touches the left or right feeler (which ever is closest) when you flip the wheel, it is thn centered. In other words; let's say your wheel is true and you are checking it for centering. You close down the lateral adjustment until one side just touches the rim. You then flip the wheel over and adjust it's centering until it just touches the same side.
Boy, this is harder to put into word than it is the show you.
Was my explanation helpful?
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.