Weinmann 610 bolt thread?

Pete Biggs asked:

Quoted message said:

Does the 610 brake caliper use a metric thread for its mounting bolt?

Yep.

Quoted message said:

What size?

All brake calipers made in the last 30 years use the same 6 x 1 mm ("M6"😉 threading.

All cantilever brakes also use this threading.

Sheldon "Ubiquity" Brown +----------------------------------------------+
| Music expresses that which cannot be said | and on which it is impossible to be silent. |
| --Victor Hugo |
+----------------------------------------------+ Harris Cyclery, West Newton, Massachusetts Phone
617-244-9772 FAX 617-244-1041 harriscyclery.comharriscyclery.comOpen ↗ Hard-to-find parts shipped Worldwide
captainbike.comcaptainbike.comOpen ↗ sheldonbrown.comsheldonbrown.comOpen ↗

"Pete Biggs" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Does the 610 brake caliper use a metric thread for its mounting bolt? What size?

M6x1., same as the pivot bolts. Use a Nylock nut for the mount to the bicycle.
--
Andrew Muzi yellowjersey.orgyellowjersey.orgOpen ↗ Open every day since 1 April 1971

A Muzi said:

"Pete Biggs" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Does the 610 brake caliper use a metric thread for its mounting bolt? What size?

Quoted message said:

M6x1., same as the pivot bolts. Use a Nylock nut for the mount to the bicycle.
--
Andrew Muzi yellowjersey.orgyellowjersey.orgOpen ↗ Open every day since 1 April 1971

What if i want want weinmann 610 mounting bolts ?? i imagine that it would be pretty difficult to
find chrome bolts 2-3' long, mostly un-threaded, with a "waterbottle" shaped cylinder head with no
scoring for a screwdriver ... where can i find such replacement parts ?? thanx,

- don

Quoted message said:

Quoted message said:

"Pete Biggs" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Does the 610 brake caliper use a metric thread for its mounting bolt? What size?

A Muzi said:

M6x1., same as the pivot bolts. Use a Nylock nut for the mount to the bicycle.

"Donald Gillies" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

What if i want want weinmann 610 mounting bolts ?? i imagine that it would be pretty difficult to
find chrome bolts 2-3' long, mostly un-threaded, with a "waterbottle" shaped cylinder head with no
scoring for a screwdriver ... where can i find such replacement parts ?? thanx,

We have those, as will most competent bicycle shops which service bicycles. Weinmann 1041 front,
1045 rear. These numbers are also used by the aftermarket suppliers.

--
Andrew Muzi yellowjersey.orgyellowjersey.orgOpen ↗ Open every day since 1 April 1971