Cycling Equipment · Public discussion

V brake front or rear?

Started by Bicyclette · · Last activity · 5 posts · 718 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
9 March 2004
Last activity
9 March 2004
Original author
Bicyclette
Posts
5
Discussion status
Public discussion
Total views
718
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. I just got an Alivio V brake set front and rear. Is there
    any way to tell which is front and which is rear? They both
    look identical. On the box the only label difference is one
    is "BR-MC18 F 22.0 X 1P 2-8GN0100A-39" and the other is
    almost the same except has "8GN0200A" instead of the
    "8GN0100A" in the second to last position.

  2. eddie-<< I just got an Alivio V brake set front and rear. Is
    there any way to tell which is front and which is rear?

    Quoted message said:
    Quoted message said:

    <BR><BR>

    If the brake blocks are not the slide in type or no
    direction arrows on them, it doesn't matter. if the above is
    so, point the arrows forward or the open ends oin the
    holders aft. The units themselves are identical.

    Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St.
    Boulder, CO, 80302
    (303)440-3535 vecchios.comvecchios.com "Ruote convenzionali
    costruite eccezionalmente bene"

  3. bicyclette said:

    I just got an Alivio V brake set front and rear. Is there
    any way to tell which is front and which is rear? They
    both look identical. On the box the only label difference
    is one is "BR-MC18 F 22.0 X 1P 2-8GN0100A-39" and the
    other is almost the same except has "8GN0200A" instead of
    the "8GN0100A" in the second to last position.


    The front one has the noodle which is bent back on itself,
    and the brake pads need to face in the right direction.
    Apart from that I could see no difference between the arms.

  4. bicyclette said:


    Quoted message said:

    I just got an Alivio V brake set front and rear. Is there
    any way to tell which is front and which is rear? They
    both look identical. On the box the only label difference
    is one is "BR-MC18 F 22.0 X 1P 2-8GN0100A-39" and the
    other is almost the same except has "8GN0200A" instead of
    the "8GN0100A" in the second to last position.

    Zog The Undeniable said:

    The front one has the noodle which is bent back on itself,

    That may be true in markets where right/front brake setup is
    common (typically, countries where they drive on the left)
    but it isn't universal.

    In the U.S. market, the noodles are the same front and rear,
    and the only difference is which way the brake shoes are
    installed.

    They used to come with two noodles, a 90 degree and a 135
    degree one, but that's no longer the case.

    Quoted message said:

    and the brake pads need to face in the right
    direction. Apart from that I could see no difference
    between the arms.

    There is no difference.

    Sheldon "Right Front Yank" Brown +--------------------------------------------------------
    +
    | Several excuses are always less convincing than one. |
    | --Aldous Huxley |
    +--------------------------------------------------------+
    Harris Cyclery, West Newton, Massachusetts Phone 617-244-
    9772 FAX 617-244-1041 harriscyclery.comharriscyclery.com Hard-to-find
    parts shipped Worldwide captainbike.comcaptainbike.com
    sheldonbrown.comsheldonbrown.com

  5. Sheldon Brown said:

    That may be true in markets where right/front brake setup
    is common (typically, countries where they drive on the
    left) but it isn't universal

    Ah, but do you know why we drive on the left? Have a look at
    this gentleman:

    speedysigns.comMASCO
    TS/KNIGHT4.gif

    and you can see that he would have to mount his horse on its
    left to avoid his sword getting in the way - swords are
    always worn on the left side of the body for right-handed
    knights because they're easier to draw that way. As you
    don't want to stand in the middle of the road (which is
    probably an open sewer in 14th century England) you have the
    horse on the left side of the road and mount it from the
    verge. Having done this, it makes sense to ride on that side
    of the road too.

    Knights were becoming rare at the time of the American
    Revolution, so we can forgive your mistake - but the French
    have no excuse ;-)

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.